They are fun guns to play with. Aimsurplus has police trade ins for $350. You could keep the fcuu and sell the slide and grip module and probably end up with the fcu for almost free

 

A populated FCU is going to cost you $299
Why not buy a used P320 for $349 and sell off the parts you don't need ?

AimSurplus, LLC

This never works for me. I just buy another FCU to build another gun out of the spare parts.

 

I tried to like the P320. I just can’t warm up to it.

I’ve got a Spectre Comp

 

Apparently, if you drop it or re-holster it, it'll warm you up.

 

A populated FCU is going to cost you $299
Why not buy a used P320 for $349 and sell off the parts you don't need ?

AimSurplus, LLC

 

New is $299 stock or $349 for the Custom.... Dealers are asking about $279 for a used Custom or $239 for a used stock FCU. I suspect I can manage to scare up a stock for $175 (From someone that pulled for the Custom) if I look. Still you might be right. I suspect a stock frame is basically worthless but value of mags and assembled slide plus fcu would likely exceed $350.

 

Id say yes. The only thing stock on mine is the barrel, slide, red dot (not including the shroud) and the FCU (minus trigger, sear, springs).

 

One of my favorite firearms.
Subcompact slide with a compact/carry grip (17+1) and barrel.
Kind of Glock 45 ish

 

One of my favorite firearms.

View attachment 1216465

That’s a nice setup

Wilson definitely improved the gun

 

Meh no, p365 yes

 

Yes.

My 320 has been laying on the table now for months on end fully loaded with one in the tube and no shots have been fired !!!!!

It had a really light pull, 1.75lbs after too much sanding and polishing. An $11 new sear was put in and finished off at 3.5 pounds, which is exactly WHAT I wanted for my use. Love the accuracy and functionality of the P320s.

 

Yes.

My 320 has been laying on the table now for months on end fully loaded with one in the tube and no shots have been fired !!!!!

It had a really light pull, 1.75lbs after too much sanding and polishing. An $11 new sear was put in and finished off at 3.5 pounds, which is exactly WHAT I wanted for my use. Love the accuracy and functionality of the P320s.

Sorry, I'm honestly not trying to be snarky but I just had to ask. What is it your use it for if it has been laying on the table for months?

 

No

 

Gorgeous thing, go for it!

 

Sorry, I'm honestly not trying to be snarky but I just had to ask. What is it your use it for if it has been laying on the table for months?

You stated you are not trying to be snarky and then go ahead and ask a question that reveals your superiority complex.

I also am not trying to be snarky, but with all the firearms that you own, do you use each one of them monthly??? I also have a 870 shotgun in the bedroom that has been loaded with one in the tube with 00 buck for years without being shot. Its my "just in case" SD weapon for intruders, Simple.

I have multiple firearms located throughout our house that have loaded mags and one in the barrel that are available for immediate use if needed. It's a new principle called...... hold on......preparation.

Just checked on my P320 that is locked and loaded............still no misfires and here I thought that model would just pop one off periodically.

 

Just checked on my P320 that is locked and loaded............still no misfires and here I thought that model would just pop one off periodically.

Lay a Glock 22.2 next to it for a few months. I heard a rumor it only happens when a Sig contracts Glock Leg Virus.

 

Ive got an M17 and M18 for collection/range purpose... I dont see myself getting another 320 of any kind...

I'll stick to the metal frames and 365 variants for the Sig brand

 

I love my 320 full size in 357 sig. I had previously shot the g31 and p226 in 357 sig, but I really didn't fall for the 357 sig until I shot it in the 320.

I also have the 9mm full size caliber conversion for the 320 and I have swapped the FCU between the 9 and 357 with zero issues.

 

I think I'll look around and see what I can come up with in an FCU. Little sister knows some Sig competitors that are bound to have some old spares laying around.

 

That, is a lost cause for sure!

 

With a Wilson Carry II for a 17 round mag and a 3.6" Compact Slide setup I thought it would luck funkier.

 

I built one about 2 years ago. It is extremely accurate. I purchased the custom shop fire control unit, x grip, sig slide with a number of lightning cuts and a Zev barrel.

You likely pay a premium for the pistol in the long run.

 

I would say that IF you can find a used FCU for a decent price, why not. As some pointed out, AIM Surplus does have LE trade-in P320s right now for about $350. As suggested, you sell what you do not need. Personally, I see no issues with any of the P320s made since 2019. Heck, I own about 17 of the P320s. If you go to the SIG website and run the s/n of a FCU to see if it had the upgrade performed. One is a RX Compact.

 

Aim also has XCarry Optic Ready LEO Trade Ins for $479.99. That may be the better deal for part outs.