Complete OEM slides with barrels AND recoil springs run around $400 on the ‘Bay. Stripped slides (no barrels, recoil springs, strikers, etc.) are around $300 maybe a little less. These are new “takeoffs”.

I picked up a 43X non MOS OEM complete slide for around $400 over a year ago. Seems like they have comedown a little since then.

It is what it is…

I am very happy with mine. Runs perfect-zero issues in a few thousand rounds.

if you go the ‘Bay route, just read the feedback. As safe as any other vendor imo.

 

I paid right at $400 for one (complete) to put on my G48. I would not do it again. Seemed like a good idea at the time.

 

About $350. Stripped slides about $225.

Much more than that and I'd look elsewhere.

Ebay is known for their price gouging vendors who frequently demand up to $500 for them. Kinda dumb when it's more than the cost of a new gun.

 

Ok, thanks. This is a private sale. Looks like $225ish without a plate or $250 with a Holosun 407k plate.

I think it’s worth jumping on. Now to find a 48MOS

 

Anything above 325 Seems high.. I bought a new g43x mos .. all in $475 for a whole gun

 

Anything above 325 Seems high.. I bought a new g43x mos .. all in $475 for a whole gun

that’s what I used as a baseline. I can get a new 48MOS FOR $475.

I think $235 is fair

 

I agree, $235 is fair, I thought the other numbers were giving were high… I would pay $235 and smile

 

$300-$350

 

I agree, $235 is fair, I thought the other numbers were giving were high… I would pay $235 and smile

that’s what I thought. I did see $350-$400 lots of places. That’s too rich for my blood.

 

I just bought a complete MOS upper micro slide from PSA (their clone version of a Glock 43) for 199.00 about two weeks ago. i use it on my Glock 48 MOS and switch them back and forth.

 

How much would a lower cost if you can find one should be the real question.

 

How much would a lower cost if you can find one should be the real question.

I thought about that, but there’s value even if I don’t find one reasonable. I plan to put an EPS Carey on the 48 MOS. This way I can swap to train irons.

 

I have a Holosun 507k and ameriglo Hackathorn style nite sites on my 48 MOS and use the complete 43X/PSA slide for the same reason. Having the ability for the optic on the micro slide is a bonus should I ever decide put one on it. The modularity works great.

 

I have a Holosun 507k and ameriglo Hackathorn style nite sites on my 48 MOS and use the complete 43X/PSA slide for the same reason. Having the ability for the optic on the micro slide is a bonus should I ever decide put one on it. The modularity works great.

That’s my thought exactly.

Quick Google search looks like a couple places show OEM frames for $150-$200 as well.

 

https://palmettostatearmory.com/cat...sult/index/q/dagger micro/?manufacturer_v2=Palmetto+State+Armory&q=dagger+micro

This what I ordered: https://palmettostatearmory.com/ble...mplete-9mm-slide-assembly-optics-ready-shield-cut-non-threaded-barrel-gray.html

They sell a LOT of Dagger compact and full size frames for 50.00 and up. There is only one micro frame they offer at this point and would imagine it would be the same price though currently is not in stock.

https://palmettostatearmory.com/psa-micro-dagger-complete-polymer-frame-black.html

You could always do th email in stock option which is what I did and do for their mags.

 

We all have different realities…

Mine-

43X MOS: $485
Tax: $33.95
Permit: $50
NICS: $65
Ttl: $633.95

So while $400 is high, it’s not “the cost of a new gun” for me.
Glad to see the PSA Dagger Micro slides mentioned.

That is what I am considering at the moment. The partial slide with 407K mounted is looking interesting.

The modularity of one frame and swapping slides adds options for less than a second pistol purchase for me.

As always-YMMV!

😂

 

$65 for a BGC?

In AZ with a cwp it's free, w/out, it's still free. For the time being FTF transactions are cash n carry

 

https://palmettostatearmory.com/catalogsearch/result/index/q/dagger micro/?manufacturer_v2=Palmetto+State+Armory&q=dagger+micro

This what I ordered: https://palmettostatearmory.com/ble...mplete-9mm-slide-assembly-optics-ready-shield-cut-non-threaded-barrel-gray.html

They sell a LOT of Dagger compact and full size frames for 50.00 and up. There is only one micro frame they offer at this point and would imagine it would be the same price though currently is not in stock.

https://palmettostatearmory.com/psa-micro-dagger-complete-polymer-frame-black.html

You could always do th email in stock option which is what I did and do for their mags.

thanks. That’s a nice option.

 

I sold a stripped one with barrel 3 months ago here on the forum for $300. It was new, never fired, included the plastic glock case with matching serial.

 

If I could find one for $300, I would have bought it....

They have been $360+ for new ones...after shipping, probably more.

Thus, I went with aftermarket and mine has been flawless.