[SPDSNYPR]

Thanks Nikky! Again, just heard of a possible issue with it.

I've only personally had issues with a handful of manufacturers' guns at schools and at work, LMT not being one of them.

 

[jnc36rcpd]

Thanks, guys. Before the current hysteria, I had been considering another AR-15. Going with the LMT/NTOA partnership would allow me to purchase a rifle at pre-hysteria prices whille supporting the NTOA.

Since I got such an informed response on this topic, please see my thread on the Patrol Rifle Optic.

Thanks again. Happy New Year and be safe.

 

[Cochese]

Thanks, guys. Before the current hysteria, I had been considering another AR-15. Going with the LMT/NTOA partnership would allow me to purchase a rifle at pre-hysteria prices whille supporting the NTOA.

Since I got such an informed response on this topic, please see my thread on the Patrol Rifle Optic.

Thanks again. Happy New Year and be safe.

To add, I built 10.5 inch LMTs for my SWAT team in 2007. 6 of them. I also built a 16 inch Defender 2000 M4.

All ran like clockwork.

posted using Outdoor Hub Campfire

 

[JuneyBooney]

NTOA now has a partnership with LMT that allows members to purchase rifles at a discounted rate. Truth be told, LMT has been below my radar as a manufacturer. Is anyone rolling with an LMT rifle? Any thoughts on quality? Thanks and be safe.

They are very good. I have one I built with a rare CMT lower and the LMT upper. Better than Bushmaster..:whistling:

 

[txleapd]

To add, I built 10.5 inch LMTs for my SWAT team in 2007. 6 of them. I also built a 16 inch Defender 2000 M4.

All ran like clockwork.

posted using Outdoor Hub Campfire

What buffer would you suggest going with on a 10.5" with a FA carrier?


Posted using Outdoor Hub Campfire

 

[Mayhem like Me]

What buffer would you suggest going with on a 10.5" with a FA carrier?


Posted using Outdoor Hub Campfire

Just an H at the heaviest..

Unless you get issues on full auto. On a semi gun H seems to be the overall best.

 

[SpectreRider]

I don't know if it will change once inventory returns (currently 100% sold out) but M&A Parts sells/sold ar kits (All but the rear sight and stripped lower) that used uppers by LMT. An m4 kit was 545.00 plus shipping of about 25.00.