[OXMYX]

There are videos on how to smooth out the action and delete the lawyer proof safety features

Dont do the aftermarket stuff.

 

[RisingPhoenix]

There are videos on how to smooth out the action and delete the lawyer proof safety features

Dont do the aftermarket stuff.

Do you mean the after-market trigger kits?

 

[OXMYX]

Do you mean the after-market trigger kits?

I performed all of the secondary operations in this video on mine and it works great,. No need to waste money, Ruger makes a good .22

I polished the bolt to a mirror finish

 

[OXMYX]

I polished the trigger assy until it looks like a mirror

 

[porschedog]

Or keep it simple and just Shoot It.

 

[jmohme]

Outside of brand new barrels (I like Douglas’), I don’t “break-in” anything gun-wise. Just enjoy it

Yes you do. You just don't realize that you are doing it while you are enjoying it.

 

[RisingPhoenix]

Or keep it simple and just Shoot It.

That's my plan for now. Maybe down the road a bit change things up. I heard from a few old timers to shoot a gun stock for a bit even if you know you want to change it, so you know it's baseline and what it's capable of stock.

 

[RisingPhoenix]

I've never needed to "break in" a gun beyond shooting it. Go shoot it.

That's what's generally meant by breaking in, i.e. shooting several hundred rounds through it to get it all smoothed out. But, some manufacturers will say to shoot standard ammo through it for that period, not +P (for calibers that have that) and so on.

 

[OXMYX]

You'll never shoot it until it smooths out, that's impossible with the Mark IV series.

The Mark IV lawyer trigger is not like my Govt Mark II. Believe me, it's not hard to polish the steel.

 

[jmohme]

There are videos on how to smooth out the action and delete the lawyer proof safety features

Dont do the aftermarket stuff.

I have gone the polishing route and it make a noticeable improvement.
I also avoid aftermarket parts on any weapon that I depend on for anything other than entertainment.

My Marks are purely for enjoyment and the Volquartsen accurizing kit is well worth it.
Besides that, I have the OEM parts should I ever need to put it back to original.

 

[RisingPhoenix]

You'll never shoot it until it smooths out, that's impossible with the Mark IV series.

The Mark IV lawyer trigger is not like my Govt Mark II. Believe me, it's not hard to polish the steel.

I think breaking in is all relative. When people refer to "breaking in" they are not saying it will "break in" to a different gun, such as a Mark IV magically having the Mark II trigger as you are referring to. They are saying that many guns require a break in period where the gun begins working smoother relative to ITSELF. Someone else mentioned on here that Kimber claims a 500 round break in. I had a Bersa that the manufacture said 200 rounds, and to only use standard FMJ factory loaded for that. It may depend on the tolerances, materials, etc, the degree to which it's true. I'm sure someone on here knows the science behind it, or the lack thereof. Many other mechanical products also have break in periods to my knowledge, including cars.

This article says it is also meant to make sure the gun is functioning properly. If someone has a defective product, the break in will hopefully reveal it before someone uses it for self-defense or something similar.

Break-In Period: Is your gun fit for duty and ready to go> (thearmsguide.com)

 

[OXMYX]

There it is, broken in for free without firing a shot. And my bolt gleams like a mirror

 

[OXMYX]

If I spent any money on my Mark IV I would spend it here.


Master Kit for Mark IV™ or Mark IV™ 22/45™ - Majestic Arms

(I did buy a spacer to get rid of the mag disconnect).

RUGER MK IV, 22/45 HAMMER BUSHING MAGAZINE DISCONNECT DELETE & -65% PRE-TRAVEL | eBay

 

[RisingPhoenix]

I have gone the polishing route and it make a noticeable improvement.
I also avoid aftermarket parts on any weapon that I depend on for anything other than entertainment.

My Marks are purely for enjoyment and the Volquartsen accurizing kit is well worth it.
Besides that, I have the OEM parts should I ever need to put it back to original.

I've heard that the Volquartsen kits are good. ABout $150 right?

 

[RisingPhoenix]

By the way, I would consider switching out to a stainless steel barrel at some point if that is an option. That is possible right with the Mark IV?

 

[RisingPhoenix]

If I spent any money on my Mark IV I would spend it here.

(I did buy a spacer to get rid of the mag disconnect).

Master Kit for Mark IV™ or Mark IV™ 22/45™ - Majestic Arms

Those look nice too.

 

[RisingPhoenix]

There it is, broken in for free without firing a shot. And my bolt gleams like a mirror

View attachment 891592 View attachment 891594 View attachment 891593

I'd love to get one day to the level of doing my own gunsmithing or polishing like you. BUT, I bought my first gun 6 months ago. I'm happy that I know how to break down and clean various guns now (took a class and own several). Baby steps.

 

[jmohme]

I've heard that the Volquartsen kits are good. ABout $150 right?

It's been some time, but I think it cost me around $120 for my Mark III 22/45 Lite

 

[jmohme]

If I spent any money on my Mark IV I would spend it here.


Master Kit for Mark IV™ or Mark IV™ 22/45™ - Majestic Arms

(I did buy a spacer to get rid of the mag disconnect).

RUGER MK IV, 22/45 HAMMER BUSHING MAGAZINE DISCONNECT DELETE & -65% PRE-TRAVEL | eBay

I have heard those are good kits too.

 

[Qman2]

Load. Shoot. Repeat