[SC-Texas]

A friend dropped off his Glock 26. In peices.

It seems that he took the slide apart and lost the following:
1. Extractor depressor plunger
2. Glock Extractor Depressor Plunger Spring
3. Glock Spring Loaded Bearing 9mm BLK

I also have a part that I cannot identify and doesn't seem to fit anywhere. Its also not in the standard Glock parts diagram.

Therefore, does anyone have a parts diagram for the G-26?

Are there any parts in the slide

 

[1096369fred]

Here is the one from OMP Express, just click on the part you need. The diagram is generic.... but should get you what you need.
(I think their prices are good too!)
Fred

http://www.ombexpress.com/category.asp?cat=426501

 

[SC-Texas]

That doesn't show the part.

I'm wondering if this is a part that is specific to the Glock 26.

 

[lethal tupperwa]

a picture might help

 

[DannyR]

There is no part specific to the G26.

 

[Ebb27]

Here's a nice link with pics of the parts and info on a detail strip.

http://www.alpharubicon.com/mrpoyz/glock/


The only major difference in the subcompacts like the G26 from the other larger models is the recoil spring assembly.

 

[wheel]

If you don't have a picture of the part, can you describe it?

 

[Tilley]

Here is the one from OMP Express, just click on the part you need. The diagram is generic.... but should get you what you need.
(I think their prices are good too!)
Fred

http://www.ombexpress.com/category.asp?cat=426501

Excellent info you shared. Thanks Fred.

 

[Butch]

Is this it?

atriot:

 

[SC-Texas]

That's not it.

I'm going to try and get a photo.

 

[Rob62]

Here is a link to a free complete armorers manual. It has complete assembly and disassembly instructions, pictures, parts diagrams, etc.

http://www.halfzware.com/wordpress/wp-content/uploads/2006/03/GlockUAM.doc


Regards,

Rob

 

[SC-Texas]

This may not even be a glock part. My friend said that the parts shot out of the back of the slide and he had to hunt them and pick them up.

So, here are the photos:

So here are the parts that I have.

 

[Butch]

Nope, that's not from a Glock, but the thing next to it is the extractor depressor plunger.....

I see the extractor in the slide, I'll guess the firing pin safety is in there too? It looks like you'll need the EDP spring and the spring loaded bearing.



atriot:

 

[SCC]

trun the slide over and take one more pic for us !!! and that other part is not from a glock at all !!!!! :whistling: and you can get them parts here shipping is only 3.00 dollars http://glockparts.com/ all so that glock have the LCI or no LCI

 

[SC-Texas]

OK, that's what I was wanting to know.

Mystery solved.

 

[tango44]

That looks like a broken 1911 grip bushing, not a Glock part.

 

[Butch]

That looks like a broken 1911 grip bushing, not a Glock part.

Similar, but the 1911 grip screw bushing would be threaded both inside and outside.

I doubt that thing is a gun part at all.



atriot:

 

[SCC]

is the 26 up and running ?

 

[GunQuest]

Ah...that is a muffler bearing!! :supergrin: