[alnicoG22]

My safe will go through periods where the handle will not lock the safe, either door open or closed. I finally took off the inside cover to take a look at the locking mechanism. Nothing seems out of place, but sometimes the bolts will not stay engaged in the lock position. Opening is never a problem. The only troubleshooting stuff I find on the internet is about the electronic keypad. This is mechanical, not electrical. Any ideas out there in Glockland? Thanks!

 

[DJ Niner]

How old is the safe?

Most safes require periodic maintenance, including lubrication of parts of the locking mechanism. If yours is too dry/unlubed, something may be "sticking" when it should be moving.

Contact a local locksmith that sells/services safes, describe the problem, see what they say.

 

[alnicoG22]

After further investigation I discovered the problem is electronic in nature after all. Winchester is sending new parts.

 

[orangejeep06]

After further investigation I discovered the problem is electronic in nature after all. Winchester is sending new parts.

I have a Liberty safe that was doing that also. I hired a locksmith and put in a S&G mechanical dial lock and tossed the electronic keypad,problem solved.