[TGT]

Let me hear from you!

For me, there is no other means for the most comfortable & concealed way to carry.
But there seems to be soooo many concealed carry guys that don't like the clipdraw method, and I often get jumped when mentioning it. So I thought that I'd open my own thread dedicated just to the loyal contingent of clipdraw users on these forums, as well as introduce it to others who are unfamiliar with it. I've carried my G33 & Kahr MK9 this way for 18 years.


PHOTO BELOW; The 2 screws do NOT go into the gun. The screws are only 1/16" long and used only to hold clip halves together.

PHOTO ABOVE; Observe how the Kydex cover string is looped very simple through your belt or belt loop. I highly recommend that you use a trigger cover when using a clipdraw.



PHOTO BELOW; Clipdraw with 3M adhesive strip. Peel away the blue paper backing and apply 3M strip onto clip. My 3M tape strip was applied 18 years ago!

Clipdraw is available in black or stainless from Ebay for about $23 shipped. I only buy the "universal" model which fastens with a 3M double-sided tape. (ie; I don't like the ones they offer that screw onto the back of your gun) The 3M tape has NEVER needed replacement in 18 years I've used it, though the clip does arrive with 6 replacement strips. The two little screws at the back can be removed along with the clip so the gun will fit in a regular holster.

IMO, a necessary addition is a kydex trigger cover. They are available for about $10-$15 from Ebay, or you can make your own easily. To use the trigger cover, you simply loop the string around your belt or belt loop and slip the kydex cover over the trigger. When you draw the gun, the kydex cover stays behind to dangle from your belt.

PHOTO BELOW; Gun hidden easily. (Photo taken using a wall mirror)

Both pictures above; were taken seconds apart. Now you see it/Now you don't!!


As long as you are not LE (ie; you don't have the daily risk of getting involved in physical altercations) there is no reason to worry about the gun dislodging from your waistband. I've had no problems with it's steady carry in 18 years.
I very rarely ask this; But if you would, kindly post a "like" here in solidarity for my thread so that I can feel I have friends & support for if/when the clipdraw haters show up. lol. Thanks.
_____________________________________________________________

 

[Neal]

Several decades back I had a Clipdraw for an S&W Model 39. Never did use it but I thought it was an interesting idea. Have you tried using it in any other position other than the one where it points close to your junk? I won't appendix carry for that reason. OK, yea, my belly is too big for that. Currently using a Glock 48 for EDC and I see there is space on the slide for that adhesive strip. The Clipdraw on the 48 would be an even slimmer profile IWB for an already slim gun, but I like a butt forward rake and I don't see how that would work with the clip. Thoughts?

 

[NJ1911]

Where is the clip in the pic with the gun IWB? I expected to see it over the top of your jeans. Maybe I'm just not seeing it. Does it clip somewhere else?

 

[chev1958]

Maybe I'm wrong, but it doesn't look like it would work for those of us who have to tuck our shirts in.

 

[jimcorbin]

I have them in my Ruger LCP and 9sPro. I love it. I can conceal my 9sPro in my cargo pocket of my uniform pants. I just clip it to the inside pocket and it stays in there, very securely.

 

[Gray Dood]

I am a BIG fan of bikini holsters. Very comfortable for me. Been using for years.

Don't really use a Clipdraw however. The bikini alone, looped thru a belt loop works just fine, especially for shorter jaunts. I tend to go OWB with a Raven Perdun for all day wear.

 

[-JCN-]

Let me hear from you!

For me, there is no other means for the most comfortable & concealed way to carry.
But there seems to be soooo many concealed carry guys that don't like the clipdraw method, and I often get jumped when mentioning it. So I thought that I'd open my own thread dedicated just to the loyal contingent of clipdraw users on these forums, as well as introduce it to others who are unfamiliar with it. I've carried my G33 & Kahr MK9 this way for 18 years.


PHOTO BELOW; The 2 screws do NOT go into the gun. The screws are only 1/16" long and used only to hold clip halves together.
View attachment 586964
PHOTO ABOVE; Observe how the Kydex cover string is looped very simple through your belt or belt loop. I highly recommend that you use a trigger cover when using a clipdraw.



PHOTO BELOW; Clipdraw with 3M adhesive strip. Peel away the blue paper backing and apply 3M strip onto clip. My 3M tape strip was applied 18 years ago!
View attachment 586968

Clipdraw is available in black or stainless from Ebay for about $23 shipped. I only buy the "universal" model which fastens with a 3M double-sided tape. (ie; I don't like the ones they offer that screw onto the back of your gun) The 3M tape has NEVER needed replacement in 18 years I've used it, though the clip does arrive with 6 replacement strips. The two little screws at the back can be removed along with the clip so the gun will fit in a regular holster.

IMO, a necessary addition is a kydex trigger cover. They are available for about $10-$15 from Ebay, or you can make your own easily. To use the trigger cover, you simply loop the string around your belt or belt loop and slip the kydex cover over the trigger. When you draw the gun, the kydex cover stays behind to dangle from your belt.

PHOTO BELOW; Gun hidden easily. (Photo taken using a wall mirror)
View attachment 586974



View attachment 586984
Both pictures above; were taken seconds apart. Now you see it/Now you don't!!


As long as you are not LE (ie; you don't have the daily risk of getting involved in physical altercations) there is no reason to worry about the gun dislodging from your waistband. I've had no problems with it's steady carry in 18 years.

________________________________________________________________________
I very rarely ask this; But if you would, kindly post a "like" here in solidarity for my thread so that I can feel I have friends & support for if/when the clipdraw haters show up. lol. Thanks.

I have a couple of guns outfitted like that. I like them fine.

But I never felt that the draw was secure or repeatable enough for my wishes.

Using an offset single clip with thin kydex doesn’t add much bulk, especially if you use an Ulti-Clip.

I like the sweat guard of kydex too, so I don’t have gun oil and carbon streaks on my belly or clothes, too.

Let me ask... aside from the comfort thing, have you ever done back to back draw and fire on a timer with that versus a traditional holster?

For me, that was the kicker that killed it for me. The thin Clipdraw clip wiggled and tilted unless in a pocket and I never got as good of a quick grip on it as a holster.

The back to back was eye opening for me. More than just being comfortable, a carry gun system should be reproducible and idiot proof on a draw. A wider attachment system prevents tilting and wiggling.

These solutions didn’t add bulk and give me a secure and reproducible handle on the grip every time. I like the thin Ulti-Clips for not adding bulk and they can be used securely on jeans without belts.

@TGT Pictures of what I believe is a superior option for me from a stability and draw standpoint without adding hardly any bulk.

G23 with Raven Concealment.
It’s basically like a Clipdraw and trigger guard in one. I like them with the wing to aid stability. If you absolutely wanted slimness you can order without.

Can’t hardly see it.

Adds no bulk.

But if you prefer a sweat guard, Desantis Slim Tuk with Ulti-Clip is great.

At least for me when I tested, I was able to draw faster and more consistently with a slim holster than a Clipdraw. IMO, unless you’re carrying a gun as a magic talisman to ward off evil and don’t really care about the shooting part, you owe it to yourself to fully vet what trade offs you make in your carry systems.

For me, these add hardly any bulk and are vastly more stable, so my Clipdraws have been retired.

 

[deputy tom]

My best friend has a clip draw installed on his 642 S&W revolver. It works well for him. tom. :cowboy:

 

[Pistolay]

My only problem with the Clipdraw is that I want a sweat guard.

 

[Diesel McBadass]

Way safer than those garbage clip only rigs i see for sale at gunstores.

 

[jr24]

Using an offset single clip with thin kydex doesn’t add much bulk, especially if you use an Ulti-Clip.

Yep. I agree with your whole post but particularly with this. My light tuck doesn't add any bulk to the gun and holds it securely in one spot all day. I carry with a forward can't at 2 o'clock and hate it when the clip won't hold it in its proper position all day, as messing with your gun is a sure give away.

FWIW, with a shirt that drapes like the OP I can carry a full size gun just fine.

 

[mac66]

I have Clipdraw clips or something similar on all my small guns. IWB at 3-4 O'clock is how I always carry if I'm not pocket carrying.

 

[porschedog]

Nice option. Use what works best for you.

 

[AK_Stick]

I have them in my Ruger LCP and 9sPro. I love it. I can conceal my 9sPro in my cargo pocket of my uniform pants. I just clip it to the inside pocket and it stays in there, very securely.

Interesting.

You are the first person I’ve met who uses one and who’s experience I trust enough to make me reconsider my position on them.

 

[John_AZ]

I’m just glad you cover the trigger with the Glock.

I have a clip draw for my old DAO LCP that I carry to ward off coyotes or bobcats when I go running. Works well for me. Has kept all the critters away. Never been attacked while carrying. Works like a charm.

 

[CAMSDADDY]

I have a couple of guns outfitted like that. I like them fine.

But I never felt that the draw was secure or repeatable enough for my wishes.

Using an offset single clip with thin kydex doesn’t add much bulk, especially if you use an Ulti-Clip.

I like the sweat guard of kydex too, so I don’t have gun oil and carbon streaks on my belly or clothes, too.

Let me ask... aside from the comfort thing, have you ever done back to back draw and fire on a timer with that versus a traditional holster?

For me, that was the kicker that killed it for me. The thin Clipdraw clip wiggled and tilted unless in a pocket and I never got as good of a quick grip on it as a holster.

The back to back was eye opening for me. More than just being comfortable, a carry gun system should be reproducible and idiot proof on a draw. A wider attachment system prevents tilting and wiggling.

These solutions didn’t add bulk and give me a secure and reproducible handle on the grip every time. I like the thin Ulti-Clips for not adding bulk and they can be used securely on jeans without belts.

@TGT Pictures of what I believe is a superior option for me from a stability and draw standpoint without adding hardly any bulk.

G23 with Raven Concealment.
It’s basically like a Clipdraw and trigger guard in one. I like them with the wing to aid stability. If you absolutely wanted slimness you can order without.

View attachment 587124

Can’t hardly see it.
View attachment 587120

Adds no bulk.
View attachment 587122

But if you prefer a sweat guard, Desantis Slim Tuk with Ulti-Clip is great.

View attachment 587118 View attachment 587116

At least for me when I tested, I was able to draw faster and more consistently with a slim holster than a Clipdraw. IMO, unless you’re carrying a gun as a magic talisman to ward off evil and don’t really care about the shooting part, you owe it to yourself to fully vet what trade offs you make in your carry systems.

For me, these add hardly any bulk and are vastly more stable, so my Clipdraws have been retired.

This post led me to my Raven vanguard and a ulticlip. I must say I am impressed.

 

[chewybaca67]

I have them on a few Glocks. They've always worked fine.

 

[Mr Wasabi]

This post led me to my Raven vanguard and a ulticlip. I must say I am impressed.

Yes, I have Raven Vanguard 2s for a couple of my guns. It works very well IME.

 

[fflincher]

Taurus PT 111 Millennium 9mm, 11 rounds, spare 10 round mag in off side pants pocket.

 

[Velvetfoot]

deleted