Glock Talk banner
  • Notice image

    Glocktalk is a forum community dedicated to Glock enthusiasts. Come join the discussion about Glock pistols and rifles, optics, hunting, gunsmithing, styles, reviews, accessories, and more!

1 - 20 of 22 Posts

PellaImpervia

· Registered
Joined
·
20 Posts
Discussion starter · #1 ·
New glock owner here, picked up a G22 RTF with Trijicon night sights last week. Now, after putting in the lightning strike 3.5lb connector to replace the horrid stock one, I need some advice on what to get to reduce recoil. Not that recoil is awful, it's just that it CAN be reduced apperantly.

Recoil springs/guide rods: Which ones will reduce recoil for the G22? I'm assuming a SS/Tungsten guide rod(not for recoil but for other purposes) but which spring?


Thx.

Paid 500 for the G22 RTF with the night sights, it was brand new. Did I get a good deal?
 
I've been using aftermarket recoil springs/rods since the mid 90's and have had zero failures in tens of thousands of rounds that can be traced back to the spring.

That being said I only use the factory weight (G22's, 17's and more recently 37's) springs.
I have identical results with ISMI and Wolff.

Unless your loading lower power ammo then I would stay away from anything but stock weight.

For your purposes, I doubt replacing the guide rod/spring will give you any reduction in felt recoil.

just keep practicing and eventually you will get used to it.
 
Stay away from the recoil buffer. Do a search on here and you'll see where people who tried them have had problems.

Not sure you actually get a reduction on recoil with different weight springs but it does feel different.

If you just want a steel guide rod I would recommend the Wolff uncaptured stainless steel with the Wolff springs. You can get a 17 pound (stock weight) and heavier or lighter as well. I have a 22 pound spring in my G35 but I have a 357 sig conversion barrel in it. I like the 20 pound spring when shooting 40 cal in the 35. Stay away from Tungsten, cost to much and brittle as well. In my EDC G23 I have a 19 pound wolff spring. (1 pound more that stock)

Oh, a good steel guide rod is every bit as reliable as the stock rod.

As far as connectors go Scherer, LWD and Ghost gets high marks most of the time on here. I have the Ghost Rocket in both my Glocks.

G22 with nights sights for 500, yes you got a good deal.
 
Well I'm coming from an FNP, I'm used to a godlike trigger
Master the stock Glock trigger and you'll hate everything else. Like many have said, leave it stock and shoot it. Shoot more, mod less.
 
You got a great deal on your G22. Years ago I bought one of the steel RSAs for my G22, but didn’t notice any change in felt recoil. Went back to using OEM in all my Glocks except for my G20 when I’m shooting Underwood rounds.
 
Replace the horrid Glock shooter and all will be well using the OEM parts.

Seriously, learning the platform rather than replacing the foundation will up your shooting game rather than depend on the tool. Like thinking training wheels on a bike improves balance and makes a better biker, or taking diet pills to get muscular or fit.
 
New glock owner here, picked up a G22 RTF with Trijicon night sights last week. Now, after putting in the lightning strike 3.5lb connector to replace the horrid stock one, I need some advice on what to get to reduce recoil. Not that recoil is awful, it's just that it CAN be reduced apperantly.

Recoil springs/guide rods: Which ones will reduce recoil for the G22? I'm assuming a SS/Tungsten guide rod(not for recoil but for other purposes) but which spring?


Thx.

Paid 500 for the G22 RTF with the night sights, it was brand new. Did I get a good deal?
Why do people ask after they buy it?
Leave it alone.
Like this guy said.
 
Replace the horrid Glock shooter and all will be well using the OEM parts.

Seriously, learning the platform rather than replacing the foundation will up your shooting game rather than depend on the tool. Like thinking training wheels on a bike improves balance and makes a better biker, or taking diet pills to get muscular or fit.
more good advice.
 
This is somewhat of an old post, but I’ll post my experience anyways. Hopefully, it will help someone avoid any issues; Glock 22 is a fairly common pistol and this is a common complaint.

I carry a Glock 22 for work. I tried have this actually. Ibought a 20lb spring and a 22lb spring. In both cases; the recoil impulse DOES feel differenty. I’m not so sure it’s better though. The impulse seemed to shift to more of a muzzle dip, than a muzzle flip.

IN BOTH CASES, I got 1-3 FTF per magazine. It seemed randomly. It appears the slide is either moving too fast for the magazine spring to feed, OR sometimes it just doesn’t feed the round.

Either way, the situation was 100% reversed by utilizing the FACTORY 17lb spring.

There are some concepts to decrease recoil, get lighter bullets. Although, the impulse might be more of a snap than a push back. Not sure, but according to physics; the recoil should decrease with the weight of the bullet.

Also, glock 22 makes a compensated model; listed as Glock 22C. It does reduce muzzle flip, but it seems more effective with higher pressure ammo.

3.5 lb connector seems pretty safe upgrade. I haven’t had any problems whatsoever with thousands of rounds.

Be careful with aftermarket triggers; MANY are NOT drop safe. Also, be careful with titanium strikers, and lightened striker springs. It does effect trigger pull weight but 100% causes LIGHT STRIKE malfunctions.

And, lastly be careful with an extended slide stop. With some people (definitely with me) you can inadvertently push the slide stop up with your support hand and prematurely lock the slide back.

With NIGHT SIGHTS. They always “sound” really good. But, if you carry you gun for duty purposes; it seems to be a waste. The minute you illuminate your target (with a pistol light), the night sights disappear. They only appear when you do NOT illuminate your target. Which you almost certainly should do before firing. Not sure of anyone that would shoot without 150% confirmation of WHO they are firing on AND confirming they are a threat/holding a weapon.

Can’t really do that in the dark. Maybe if I was a spy with a suppressor and needed to assassinate a predetermined target in a dark alley; I’d been watching for days. But, they are worthless to me as a LEO. I swapped them for a SINGLE RED fiber optic and swapped the Glock rear sight around so it’s FLAT BLACK. Seems to work much, much better. And, it’s cheap!

As everyone else has said; it’s not so bad after you get used to it. And, you will over time and eventually get good enough to where no don’t notice it as much anymore. The answer, is probably to put MORE rounds behind the gun and buy LESS upgrades.

Well, that’s my take; disagree or not. That’s been my experience over a decade of using this Glock 22, Gen 3. Oh I forgot, there’s a rubberized grip that lasts ALOT longer than a hogue grip. It’s cheap, and I think it’s called a “raptor grip.” I also use a very minimal, Mag well adapter to help with mag changes.

Good luck
 
If you want to reduce muzzle flip, install one of these.
 
1 - 20 of 22 Posts