[ActanonVerba70]

This thread might help to trouble shoot your problem:

https://www.glocktalk.com/threads/t...m/threads/trigger-safety-not-resetting-everthing-the-same-but-the-shoe.1597329/

Take a look at posts #4,10, 11 and 12 among others.

EDIT: when you state that you cleaned it and then the problem emerged - was it a field strip or detailed strip?

 

[ActanonVerba70]

What's up with your trigger shoe?

Good catch! Is there a missing pin for the trigger safety????
Maybe it's just the picture - hard to tell.....

 

[ActanonVerba70]

I’d pull the trigger group back out of the gun and inspect for anything odd. I know it’s easy to put the trigger bar off center in the trigger spring cup.

I have a 34 with a similar issue that I haven’t dealt with yet. My trigger safety works 99% but drags on the frame when pressing the trigger.

Is it the lighting is something wrong with the pin for the trigger safety tab? It should be flush with the trigger but it looks like there is an empty hole.

Sorry OdinIII - I just noticed that you asked the same question about the pin for the trigger safety......