[pblanc]

The empty BX10 Ruger rotary magazine should drop free of your receiver without having to pull it out, but you may need to check your rifle and mags first to make sure the stock or plastic over-mold on the magazines is not causing binding.

Timber Creek makes a fairly inexpensive magazine release lever for the Ruger 10/22 that I like a little better than the stock one:

http://www.ebay.com/itm/TIMBER-CREE...EEK-RUGER-10-22-EMR-EXTENDED-MAGAZINE-RELEASE-LEVER-ANODIZED-BLUE-/272919795883

This lever works the same way as the stock Ruger lever in that you push it forward to drop the magazine. The main reason I like it is that it allows me to place my support hand directly under the balance point of the rifle (under the magazine) when shooting offhand.

 

[rainman33]

The empty BX10 Ruger rotary magazine should drop free of your receiver without having to pull it out, but you may need to check your rifle and mags first to make sure the stock or plastic over-mold on the magazines is not causing binding.

Timber Creek makes a fairly inexpensive magazine release lever for the Ruger 10/22 that I like a little better than the stock one:

http://www.ebay.com/itm/TIMBER-CREE...EEK-RUGER-10-22-EMR-EXTENDED-MAGAZINE-RELEASE-LEVER-ANODIZED-BLUE-/272919795883

This lever works the same way as the stock Ruger lever in that you push it forward to drop the magazine. The main reason I like it is that it allows me to place my support hand directly under the balance point of the rifle (under the magazine) when shooting offhand.

Looks like a well thought out magazine release.

At this point I’m focusing on 2 rifles; TCR-22, and Ruger Target Lite.

Both get me pretty close to where I want to be at the end of the day, and it’s eight out of the box.

 

[AndyK]

Can anyone point me to online retailers that sell custom 10/22s? Nothing crazy, just someplace that’s doing basic upgrades so I don’t have to buy a stock rifle then buy the upgrades after.

Tactical solutions, volquartson, magnum research, a guy named Kurt grimes custom builds them with what you want on them. Be prepared to spend a grand on any of them, more probably.

I would go with a marlin 795 with tech sights and a mcarbro adjustable trigger and springs and a DIP trigger guard. Under 350 And easy to install.

 

[rainman33]

Tactical solutions, volquartson, magnum research, a guy named Kurt grimes custom builds them with what you want on them. Be prepared to spend a grand on any of them, more probably.

I would go with a marlin 795 with tech sights and a mcarbro adjustable trigger and springs and a DIP trigger guard. Under 350 And easy to install.

$500 is the most I want to spend, which is where the Target Lite comes in. For around 300 is the TCR-22. I don’t know much, anything, about Thompson Center. How’s there customer service record, quality, etc.?

 

[pblanc]

Have you decided what manner of sighting system you are going to use?

 

[rainman33]

Have you decided what manner of sighting system you are going to use?

I’m going to take the advice from members here and use a scope the first time. I’ve never had any formal instruction on firearms, so I’m looking to get the basics out of it.
I plan on getting familiar with the 22 I purchase well before I take the Appleseed courses.

 

[AndyK]

Any semi auto .22 you buy, you need to put a good 500 rounds through it, 40 gr high velocity is my preferance, so its broken in before you go to appleseed. If you want to scope it, forget the tech sights but remember a decent scope will not come with rings so you need to factor them in your budget. Nikon has the most scope for the lowest price. Don't get one from Wal-Mart. You get what you pay for with scopes. You also need several mags. Buy factory ones, stay away from promags. They suck. I'm telling you, on your budget the marlin 795 will be perfect. Mags are only like 14 bucks. Trigger springs 30, trigger about 60. So for 230 bucks or so, you have a gun with a decent trigger, about 3 lbs with the pre and post travel adjusted out. Stock triggers suck on just about all 22s. None of mine are stock. I have triggers that cost as much as the gun. And they are worth it. Go to the website rimfirecentral.com. lots of info.

 

[Borg Warner]

Looks like a well thought out magazine release.

At this point I’m focusing on 2 rifles; TCR-22, and Ruger Target Lite.

Both get me pretty close to where I want to be at the end of the day, and it’s eight out of the box.

I'd go with the Target lite. the TCR does not have an improved trigger but will accept the Ruger BX trigger.

The trigger makes a huge difference.

https://www.budsgunshop.com/catalog/product_info.php/products_id/49106

 

[happie2shoot]

RUGER® 10/22® 10RD 22LR SYNTHETIC MAGAZINE 3 PACK
Special Sale: $29.99
https://www.cdnnsports.com/ruger-1022-22lr-10rd-syn-mag-3-pack-factory.html?___SID=U#.XT5jpvJKjIU

https://www.cdnnsports.com/magazine...mpaign&utm_content=RecurringAutomatedCampaign#manufacturer=RUGER®&caliber=22 LR

 

[rainman33]

I'd go with the Target lite. the TCR does not have an improved trigger but will accept the Ruger BX trigger.

The trigger makes a huge difference.

https://www.budsgunshop.com/catalog/product_info.php/products_id/49106

I really like the target lite, but the quality of the T/CR22 seems hard to beat, and I like that the rail is machines into the top.

 

[Borg Warner]

I really like the target lite, but the quality of the T/CR22 seems hard to beat, and I like that the rail is machines into the top.

Put a BX trigger in it and it would probably be a nice gun. Have you seen one up close and handled one to know for a fact that the quality is really as good as people say it is on Youtube videos? Compare one to a Target Lite that you also are able to see up close and personal.

 

[rainman33]

Put a BX trigger in it and it would probably be a nice gun. Have you seen one up close and handled one to know for a fact that the quality is really as good as people say it is on Youtube videos? Compare one to a Target Lite that you also are able to see up close and personal.

I have seen one example, but without taking it down it was essentially a Ruger clone.

 

[pblanc]

OK, here is a shopping list for you. Obviously, it is not the only possible list. If a friend were asking me what to buy for Appleseed however, this is exactly what I would recommend and I have used every item on it, but one:

Ruger 10/22 carbine with "sporter" (thin, taper) barrel. You can usually find one new for around $200 if you shop around.

Evolution Gun Works extended Picatinny rail for the Ruger 10/22 - $36 on Amazon. This will mount perfectly right on the top of the receiver using the tapped screw holes already there. It will be long enough for you to use simple vertical rings with most any rifle scope to properly mount the scope.

Three pack of 10 round Ruger BX10 magazines - $30 as shown above.

Brimstone Gunsmithing Tier 3 trigger job - $55 including the two-way shipping costs.

Auto-bolt release. This you can do yourself for free. If you don't want to modify an original part, you can buy an auto bolt release bolt catch lever from Volquartsen and other manufacturers for around $12. This is the only part on the list I have not actually used.

Volquartsen Exact Edge extractor - $12. Might not be needed, more for peace of mind.

Hawke Vantage 3-9x40 AO rifle scope with a pair of Weaver Quad-lock rings - $120 on Amazon. This is the exact scope and rings I use for AS. The AO stands for adjustable objective. I would strongly recommend a scope with either an adjustable objective or side parallax adjustment at the erector. Most rimfire scopes are set to be parallax free at 50 yards if they do not have this feature. This is one of the cheapest good scopes with AO. A scope with AO will not only reduce parallax error but also allow you to get much better focus on those tiny 400 yard scaled targets used on the AS AQT. If you are willing to pay a bit more, consider the Nikon 3-9x40 EFR with AO.

Timber Creek magazine release lever - $16. You really don't need it, but ...

NcStar VISM shooting mat - $25 on Amazon. Make sure you get a tan one (anything but black) for summer use.

Pair of 1 1/4" sling swivels - $10.

Ammogarand 1 1/4" web USGI sling - $13. Beware of some cheaper web slings you might find on ebay, Amazon and elsewhere. Ammogarand uses top quality hardware which makes a big difference. Some web slings use cheap hardware with a soft, weak sling keeper/cam lever that won't hold securely.

Total cost of the above $529. If you do the auto bolt release mod yourself $517. Omit the TC magazine release lever $501.

You might still need to invest in a bit of vet wrap and foam for a stock comb riser and a pair each of volleyball knee and elbow pads.

 

[rainman33]

OK, here is a shopping list for you. Obviously, it is not the only possible list. If a friend were asking me what to buy for Appleseed however, this is exactly what I would recommend and I have used every item on it, but one:

Ruger 10/22 carbine with "sporter" (thin, taper) barrel. You can usually find one new for around $200 if you shop around.

Evolution Gun Works extended Picatinny rail for the Ruger 10/22 - $36 on Amazon. This will mount perfectly right on the top of the receiver using the tapped screw holes already there. It will be long enough for you to use simple vertical rings with most any rifle scope to properly mount the scope.

Three pack of 10 round Ruger BX10 magazines - $30 as shown above.

Brimstone Gunsmithing Tier 3 trigger job - $55 including the two-way shipping costs.

Auto-bolt release. This you can do yourself for free. If you don't want to modify an original part, you can buy an auto bolt release bolt catch lever from Volquartsen and other manufacturers for around $12. This is the only part on the list I have not actually used.

Volquartsen Exact Edge extractor - $12. Might not be needed, more for peace of mind.

Hawke Vantage 3-9x40 AO rifle scope with a pair of Weaver Quad-lock rings - $120 on Amazon. This is the exact scope and rings I use for AS. The AO stands for adjustable objective. I would strongly recommend a scope with either an adjustable objective or side parallax adjustment at the erector. Most rimfire scopes are set to be parallax free at 50 yards if they do not have this feature. This is one of the cheapest good scopes with AO. A scope with AO will not only reduce parallax error but also allow you to get much better focus on those tiny 400 yard scaled targets used on the AS AQT. If you are willing to pay a bit more, consider the Nikon 3-9x40 EFR with AO.

Timber Creek magazine release lever - $16. You really don't need it, but ...

NcStar VISM shooting mat - $25 on Amazon. Make sure you get a tan one (anything but black) for summer use.

Pair of 1 1/4" sling swivels - $10.

Ammogarand 1 1/4" web USGI sling - $13. Beware of some cheaper web slings you might find on ebay, Amazon and elsewhere. Ammogarand uses top quality hardware which makes a big difference. Some web slings use cheap hardware with a soft, weak sling keeper/cam lever that won't hold securely.

Total cost of the above $529. If you do the auto bolt release mod yourself $517. Omit the TC magazine release lever $501.

You might still need to invest in a bit of vet wrap and foam for a stock comb riser and a pair each of volleyball knee and elbow pads.

Thanks for the list. One question. Why the sporter profile barrel?

 

[pblanc]

You really don't need the heavier bull barrel to shoot Appleseed.

While the bull barrels can sometimes enhance accuracy because they tend to damp barrel harmonics, because of the way that the barrel of the 10/22 mounts onto the receiver, the heavier bull barrels can be subject to barrel droop unless the barrel is bedded into the stock.

Although there are aftermarket bull barrels with front sights made for the Ruger 10/22, if you buy a stock Ruger with a bull barrel and want to add iron sights, you will likely need to have the barrel cut for a front sight dovetail.

Here is a pretty good deal on a plain Jane Ruger 10/22 carbine with wooden stock:

http://gunprime.com/product/ruger-10-22-22-lr-wood-stock-10-22-rb-1103/

If you buy a Ruger carbine and decide you want to enhance accuracy, send it to Randy at CPC. He will also install an aftermarket barrel for you if you have one drop-shipped to him.

 

[happie2shoot]

Still in stock,,

RUGER 10/22 .22 LR "MANS BEST FRIEND" COLLECTOR SERIES RIFLE, OD GREEN - 31115
IN STOCK
$ 199.99

https://palmettostatearmory.com/rug...eries-rifle-od-green-31115.html&utm_campaign=Daily+Deal&utm_content=12:00+Email

 

[mac66]

You really don't need the heavier bull barrel to shoot Appleseed.

While the bull barrels can sometimes enhance accuracy because they tend to damp barrel harmonics, because of the way that the barrel of the 10/22 mounts onto the receiver, the heavier bull barrels can be subject to barrel droop unless the barrel is bedded into the stock.

Although there are aftermarket bull barrels with front sights made for the Ruger 10/22, if you buy a stock Ruger with a bull barrel and want to add iron sights, you will likely need to have the barrel cut for a front sight dovetail.

Here is a pretty good deal on a plain Jane Ruger 10/22 carbine with wooden stock:

http://gunprime.com/product/ruger-10-22-22-lr-wood-stock-10-22-rb-1103/

If you buy a Ruger carbine and decide you want to enhance accuracy, send it to Randy at CPC. He will also install an aftermarket barrel for you if you have one drop-shipped to him.

As much as I hate to admit it, my Remington 597 Heavy Barrel which I bought OTD at sports retailer for $200 out shoots all my 10/22s including a $800+ custom built one. I ditched the cheap 3-9x scope that came with it and mounted a Nikon 3-9x Rimfire Prostaff on it. The trigger isn't all that good but again, it outshoots my custom 10/22 with honed trigger package.

 

[Justamessenger]

Don’t buy a bull barrel gun and expect your kids to be able to shoot it. Try holding your aim for 5 minutes in the store, then imagine having a fraction of your strength.
An Appleseed is 1 or 2 days...

 

[rainman33]

Don’t buy a bull barrel gun and expect your kids to be able to shoot it. Try holding your aim for 5 minutes in the store, then imagine having a fraction of your strength.
An Appleseed is 1 or 2 days...

That’s what’s so intriguing about the Target Lite.

 

[rainman33]

Has anyone see a Winchester Wildcat, yet?
Depending on how accurate it turns out to be, I could be very intereste