[Al L]

I received a Glock 43 for Christmas & yesteray I finally had a chance to fire it for the first time. I was surprised to find it had a heavy trigger pull. I just checked on a small digital pull scale & found that it has a 7 lb. trigger pull. I thought it was supposed to have around a 5-5.5 lb. pull. I really don't like the higher trigger pull & would prefer a pull of around 5 lbs.

So, is there a way that I can adjust the trigger pull, aside from bringing it to a gunsmith?

 

[Sombra]

Recognizing the legal cautions that go along with modifying the factory trigger pull on any carry or defense gun (see Massad Ayoob's postings on GATE here), you probably have two choices: (1) shoot lots and lots of rounds through the gun and hope it settles in to a lower pull weight; or (2) an after-market trigger kit. For an after-market trigger kit, everyone has their own preferences. I think that Glocktriggers.com is the way to go, because they use (mostly or completely) OEM parts. See here.

Good luck.

 

[toddwchandler]

Ghost makes a drop in connector for the G43 that can be found here:

http://www.ghostinc.com/product/GHO_42-43_2424_V_1/G42G43-EDGE-CONNECTOR.html

They claim an average reduction of 3lb with this connector. I have not personally tried it, but have installed a Ghost connector in my G19 and been very happy.

All of this being said, if this is going to be your carry pistol, there are a wide variety of opinions on whether or not you should modify the pistol or replace any of the OEM parts with aftermarket parts. Form your own opinion, but keep in mind that your life may depend on this pistol functioning properly and you must decide if you are comfortable using non-OEM parts. I have not yet seen a Glock minus connector for the G43, but it could be forthcoming and would also help with the pull weight.

 

[snappy]

Take it out and shoot the fire out of it, that's what I did and there was a noticeable difference in the trigger pull afterwards.

 

[Sublimeon24s]

I just got my 43 last Weds and the trigger pull was super heavy compared to my other Glocks. At the range Saturday, the guy next to me had a 43 as well with the Ghost connector. It felt nice, closer to the pull on my recently purchased G26 with the internals polished and 600 rounds through it. I decided to get one, will be putting it in today after work

 

[jack852]

I received a Glock 43 for Christmas & yesteray I finally had a chance to fire it for the first time. I was surprised to find it had a heavy trigger pull. I just checked on a small digital pull scale & found that it has a 7 lb. trigger pull. I thought it was supposed to have around a 5-5.5 lb. pull. I really don't like the higher trigger pull & would prefer a pull of around 5 lbs.

So, is there a way that I can adjust the trigger pull, aside from bringing it to a gunsmith?

I put a Ghost Connector in my 43. It brought the pull weight down and I think it now feels about consistent with the stock trigger on my 19. It was an inexpensive but worthwhile modification and I've had no issues with reliability.

 

[34shooter]

Recognizing the legal cautions that go along with modifying the factory trigger pull on any carry or defense gun (see Massad Ayoob's postings on GATE here), you probably have two choices: (1) shoot lots and lots of rounds through the gun and hope it settles in to a lower pull weight; or (2) an after-market trigger kit. For an after-market trigger kit, everyone has their own preferences. I think that Glocktriggers.com is the way to go, because they use (mostly or completely) OEM parts. See here.



Good luck.

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

 

[Rocky7]

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

Opinions are entitled, name calling not so much, as a new member you might rethink your approach to make comment.

 

[Ofc.JL]

Due to their size, Glock 43's tend to have pretty stiff trigger pulls at first. The classic way of improving a Glock trigger is by shooting the pistol a bunch. Put 500 rounds thru it, clean it well, and then try the trigger pull. I think you will be happy with it after that.
And a word of caution here. Use of aftermarket parts open you up to several problems from reliability of the firearm, to liability from other parties in the event you have to use the pistol in a defense scenario. And on top of that, a really light trigger pull on a Glock can be dangerous to your well being, as in a possible AD. I have not found an after market connector that improves the trigger on a Glock, regardless what people will tell you. Connectors on Glocks are very critical as to the reliability of the weapon, and the proper function of the fire control group. You cannot achieve a 1911 style trigger letoff with a Glock, w/o causing other problems. If, after several hundred rounds thru your 43, you still find the trigger un-acceptable, you might be happier w/ another brand of carry pistol that imitates a 1911 almost exactly. I am not saying that you will, but I am just throwing that thought out their, IMHO.
Go shoot that 43 a bunch and then decide.
Best of luck.

 

[Ofc.JL]

34shooter; go train w/ Ayoob and then tell us that. Your comments seems unwarranted.

 

[usnret]

Ponder this thought. The 43 is more of a pocket carry gun. Do you want a light trigger in a pocket carry gun that might go off when you draw it out of your pocket?
Go shoot the gun a bunch and the trigger will smooth out and you will also get use to it.

 

[Bruce M]

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

You probably should add your experience and expertise in training and in court case preparation and testimony because without that the comment seems rather empty and hollow.

 

[Terlingueno]

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

That's the fastest trip to the ignore button I've seen here...

 

[hurley842002]

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

Name calling isn't necessary no matter who it is, but as a valued Glocktalk "GATE" contributor, your comment towards Ayoob is certainly unnecessary.

 

[Rocky7]

I received a Glock 43 for Christmas & yesteray I finally had a chance to fire it for the first time. I was surprised to find it had a heavy trigger pull. I just checked on a small digital pull scale & found that it has a 7 lb. trigger pull. I thought it was supposed to have around a 5-5.5 lb. pull. I really don't like the higher trigger pull & would prefer a pull of around 5 lbs.

So, is there a way that I can adjust the trigger pull, aside from bringing it to a gunsmith?

The 43 being a gift did not allow a first hand exam, especially relative to the trigger pull.
The proposed trigger pull by Glock is probably a full pound off of its suggested pull being heavier. Glock has also earlier in years past suggested a lighter pull with a connector they labeled as 3.5.

There can be responses that support the trigger adjustment and proposed legal issues.

I would evaluate the Form and Fit of the 43, if it passes these tests then suggest Function of the trigger.

I am not a fan of the 42 or 43, I have what I need in the 26/17. Pursuing the function of trigger I would suggest a private PM to a poster who suggests success and YOUR best interests, Good Luck.

 

[stevedal12]

I had the same issue with my 43, but the pull was more like 8lbs, so I went with the Ghost edge connector, it's now exactly 5 lbs where it should be and fun to shoot. Do what you feel comfortable doing on this.

 

[screwedby]

Ayoob is an idiot. Do whatever you want to the trigger. Make sure the safeties function correctly, springs can cause problems.

"Its best to remain silent and be thought a fool than open your mouth and remove all doubt."

Abraham Lincoln

In your case old Abe was being kind.

screwedbygoogle
original username modified by google

 

[tampashooters]

Recognizing the legal cautions that go along with modifying the factory trigger pull on any carry or defense gun (see Massad Ayoob's postings on GATE here), you probably have two choices: (1) shoot lots and lots of rounds through the gun and hope it settles in to a lower pull weight; or (2) an after-market trigger kit. For an after-market trigger kit, everyone has their own preferences. I think that Glocktriggers.com is the way to go, because they use (mostly or completely) OEM parts. See here.

Good luck.

Do people still quote this lie.

 

[tampashooters]

He

Name calling isn't necessary no matter who it is, but as a valued Glocktalk "GATE" contributor, your comment towards Ayoob is certainly unnecessary.

May not be an idiot, but the lie he told caught on and is repeated ad nauseum.

 

[Sublimeon24s]

Just put the Ghost edge in mine.......its deff not a "wow omg" difference like my ZEV V4 connectors in my bigger guns, but enough to make my 43 feel good. Like others have described, it pretty much feels like a well worn in factory 19 / 26 trigger now