close

Privacy guaranteed - Your email is not shared with anyone.

trigger travel stop

Discussion in 'Band of Glockers' started by jundeleon, Sep 26, 2004.

  1. jundeleon

    jundeleon

    Messages:
    530
    Likes Received:
    0
    Joined:
    Aug 31, 2003
    My para ltd and usp tactical both have trigger travel stops.
    Does this device/system have any practical use? What harm could a few millimeters of trigger overtravel can do to your shooting?
     
  2. Eye Cutter

    Eye Cutter

    Messages:
    8,193
    Likes Received:
    2
    Joined:
    Nov 21, 2002
    Location:
    Dr. B. Eye
    wala naman. bibilis splits mo. kasi tumatagal lang yung return ng trigger to reset for the next shot. umaatras pa trigger mo after the hammer has been released

    the over travel screw should be set at the point where your trigger releases the hammer. pag na set mo na, i-loctite mo na yung screw. pag gumagalaw, baka umikot pa and can cause a malfunction.
     

  3. Hermo Gut

    Hermo Gut

    Messages:
    288
    Likes Received:
    0
    Joined:
    Sep 25, 2003
    Location:
    Metro Manila , Philippines
    If you set your trigger's over travel screw to a point just after the sear release you'll probably end up shooting to the left most of the time, that is if you're not still an expert.Better to leave around .25in trigger travel, this will ensure better shooting consistency & accuracy.;) For HK USP, check and feel the hammer movement while pressing the trigger.If it feels rough, re-adjust the over travel screw.Hk's DA operation is quite sensitive to that screw adjustment. ;)
     
  4. mc_oliver

    mc_oliver

    Messages:
    3,499
    Likes Received:
    0
    Joined:
    Feb 21, 2002
    Location:
    Philippines
    A lot!

    If you'r a mild "grip milker", you can be generous in your over travel and allow the hammer to drop before the trigger hits the stop and you "milking the grip", causing your shot to go errant. ;)