close

Privacy guaranteed - Your email is not shared with anyone.

Trigger take-up issue

Discussion in 'General Glocking' started by FiremanBob, Aug 20, 2012.

  1. FiremanBob

    FiremanBob

    Messages:
    39
    Likes Received:
    0
    Joined:
    May 11, 2009
    G26 Gen4. after installing a Glockworx race connector I noticed that at the very beginning of the trigger squeeze there would be a slight snag and an audible click before the rest of the take-up was smooth up to a very crisp, light break.

    This did not occur with the stock connector, which gave a silent, smooth take-up.

    After dry-firing a few dozen times I noticed that with the aftermarket connector I could get it to take-up smoothly only if I put my finger squarely and solely on the trigger safety. Any initial contact with the trigger itself rather than the safety blade would cause the snag/click.

    While I appreciate the good trigger-squeeze discipline that this enforces, I wonder if it is normal or not. It feels like the side play in my Ruger 10/22 that is remedied with trigger shims.

    What do you experts here say?
     
  2. DannyR

    DannyR Moderator Millennium Member

    Messages:
    20,048
    Likes Received:
    340
    Joined:
    Dec 17, 1998
    Location:
    Stuarts Draft, Virginia
    Your problem is with the aftermarket part.
     

  3. SARDG

    SARDG

    Messages:
    7,538
    Likes Received:
    7
    Joined:
    Nov 12, 2006
    Location:
    Florida's Left Coast
    How do you not press the trigger safety prior to pressing the trigger?
     
  4. FiremanBob

    FiremanBob

    Messages:
    39
    Likes Received:
    0
    Joined:
    May 11, 2009
    What I mean and didn't express clearly is that my finger has to be perfectly centered on the safety to press the trigger without the snag. This is not true with the OEM connector.
     
  5. SJ 40

    SJ 40 Deplorable,Clinger

    Messages:
    16,042
    Likes Received:
    7,662
    Joined:
    Jan 17, 2011
    Location:
    In The Green Mountains
    It is oft times very difficult to improve over a factory part. SJ 40