Trigger bar G19 gen 5 friction with Hold open

Discussion in 'General Glocking' started by Paconero, Oct 28, 2020.

  1. Paconero

    Paconero

    Messages:
    54
    Likes Received:
    44
    Joined:
    Oct 10, 2020
    Location:
    Milano, Italy
    Good morning friends, I wanted to report what is an anomaly. When I pull the trigger, the bar comes into contact with the hold open bar. Is this normal? I tried to decrease and polish the hold open bar. The problem lessened, but it still exists.
     

    Attached Files:

    Fortunate Son likes this.
  2. Paconero

    Paconero

    Messages:
    54
    Likes Received:
    44
    Joined:
    Oct 10, 2020
    Location:
    Milano, Italy
    Ho fatto diversi test; senza sicurezza percussore, lo stesso. poi penso che lo spostamento della barra sia dovuto alla pressione che esercita per armare il percussore.
     
    Fortunate Son likes this.

  3. harold63

    harold63 I'm not retired

    Messages:
    7,146
    Likes Received:
    3,630
    Joined:
    Nov 25, 2014
    Location:
    SW Florida
    Who you calling a ho fatto?

    You're probably going to have to be more specific. Look in the owner's manual to get the correct name of the parts you're talking about.
     
  4. Paconero

    Paconero

    Messages:
    54
    Likes Received:
    44
    Joined:
    Oct 10, 2020
    Location:
    Milano, Italy
    Scusa, ho problemi con la traduzione ... cercherò di fare meglio la prossima volta.
     
    OttoLoader and Fortunate Son like this.
  5. Fortunate Son

    Fortunate Son

    Messages:
    546
    Likes Received:
    1,550
    Joined:
    Jun 26, 2019
    I have done several tests; without firing pin safety, the same. then I think that the movement of the bar is due to the pressure it exerts to arm the firing pin.

    Sorry, I'm having trouble with the translation ... I'll try to do better next time.
     
  6. cciman

    cciman MacGyver

    Messages:
    6,994
    Likes Received:
    2,573
    Joined:
    Jan 19, 2009
    Guarda nel manuale del proprietario per ottenere il nome corretto delle parti di cui stai parlando. Usa i termini e la lingua giusti per ottenere risultati migliori.

    Google Translate è meraviglioso.
     
    OttoLoader and Paconero like this.
  7. thomgetch

    thomgetch

    Messages:
    215
    Likes Received:
    253
    Joined:
    Apr 1, 2018
    There is some contact between the two on a gen 5. I do more than polish.. I thin that portion of the slide lock where the trigger bar can slide against it to smooth the trigger pull. This is however normal and part of the gen 5 design.
     
    Paconero likes this.
  8. Paconero

    Paconero

    Messages:
    54
    Likes Received:
    44
    Joined:
    Oct 10, 2020
    Location:
    Milano, Italy
    Thanks friend you have solved my doubts, and confirm that you too have done this job ... Thanks thanks friend
     
    OttoLoader likes this.
  9. Paconero

    Paconero

    Messages:
    54
    Likes Received:
    44
    Joined:
    Oct 10, 2020
    Location:
    Milano, Italy
    Tonight I solved the Slide stop lever in contact with Trigger with trigger bar anomaly. Eliminated 0.3'mm now it's perfect !!
     

    Attached Files:

    OttoLoader likes this.
  10. OttoLoader

    OttoLoader

    Messages:
    2,366
    Likes Received:
    3,740
    Joined:
    Aug 29, 2015
    Bella.

    Vita dolce.