close

Privacy guaranteed - Your email is not shared with anyone.

SWR Trident 9 LCD / Threads?

Discussion in 'Free Fire Zone' started by wct097, Mar 12, 2010.

  1. wct097

    wct097

    Joined:
    Jan 11, 2000
    Messages:
    2,053
    Likes Received:
    90
    Location:
    VA
    Is the LCD for the Trident 9 available in different thread patterns? From what I gather, the LWD 9mm:40 threaded barrels are a 1/2x28 thread, while the Sig P239 barrels are a 13.5x1LH thread. Would I end up having to buy two mounts if I wanted to use the can on both guns? Are there adapters to go from one to the other?
     
  2. bdavis

    bdavis

    Joined:
    Dec 12, 2005
    Messages:
    127
    Likes Received:
    0
    Location:
    Central Ohio
    You will need 2 pistons. IIRC they run about $50. Alternately, see if LWD will thread your barrel 13.5X1 LH

    Good luck.
     

  3. wct097

    wct097

    Joined:
    Jan 11, 2000
    Messages:
    2,053
    Likes Received:
    90
    Location:
    VA
    So the LCD mount for the Trident 9 can be ordered in both thread patterns? I can live with that, I'm just curious as there are few details I can find on the 'net.
     
  4. bdavis

    bdavis

    Joined:
    Dec 12, 2005
    Messages:
    127
    Likes Received:
    0
    Location:
    Central Ohio
    Yes, the LCD mount can be ordered in both thread patterns. However, you do not need the entire LCD. You only need the threaded portion which is typically referred to as the piston. The LCD will disassemble so that you can swap out the pistons as needed for the pistol of your choice.
     
  5. wct097

    wct097

    Joined:
    Jan 11, 2000
    Messages:
    2,053
    Likes Received:
    90
    Location:
    VA
    Gotcha. Thanks. That's exactly what I needed to know.