raven holster problems

Discussion in 'General Glocking' started by tommy05, Mar 13, 2010.

  1. tommy05

    tommy05

    Messages:
    399
    Likes Received:
    0
    Joined:
    Sep 4, 2007
    I've had this raven holster for my g19+x300 light for a few months. Its been great, good construction, and quality, but I have problems attaching it and removing it from my belt. I have a super stiff wilderness belt with the polymer lining. The belt does not want to slide through the standard holster belt loops easily. Anyone have any insight or have this problem as well? I know the point of the belt is to not bend an be stiff, I'm looking for guidance. Inserting is easier, but to take my belt out of the loops requires both arms and my whole body twisting to pull it out of the holster.
     
  2. DannyR

    DannyR Moderator Millennium Member

    Messages:
    20,136
    Likes Received:
    426
    Joined:
    Dec 17, 1998
    Location:
    Stuarts Draft, Virginia
    I use a regular Wilderness belt, which is stiff enough, and nave no problems.
     

  3. tommy05

    tommy05

    Messages:
    399
    Likes Received:
    0
    Joined:
    Sep 4, 2007
    I guess the CSM polymer was overkill for my needs
     
  4. DLL9mm

    DLL9mm

    Messages:
    3,182
    Likes Received:
    98
    Joined:
    Feb 8, 2009
    Location:
    MICHIGAN
    Try putting your belt on the other way, so the thick velcro side is on the oposite side(the side you don't carry on)