Hi, I'm selling an Aimpoint Comp M3 (2 MOA) with LaRue Tactical Cantilever Mount that's in great condition. Aimpoint is among the best optics (currently used by our boys in the Armed Forces) out in the market. LaRue Tactical mounts are also recognized as being one of the best mounts on the market today due to their high quality craftsmanship and their ability to hold a true zero (even after removing the optic from your rifle and then putting it back on). I'm selling the optic because I have too many. This particular one was supposed to go on a new build that I was doing. Unfortunately my wife and I are in the process of buying a house so my new build is now on the back burner (so this has to go). Here is some additional information about the optic. Unique features for CompM3 * Compatible with every generation of NVD * New technology called ACET allows 50,000 hours of operation on one single battery (on setting 7 out of 10) * 500,000 hours of use on NVD setting * Unequalled light transmission * Available in 2 dot sizes (2 and 4 MOA) * Submersible to 45 meters (135 feet) * Comes with replaceable outer black rubber cover Standard features for all Aimpoint® sights * Unlimited field of view * Parallax-free with unlimited eye relief * Unaffected by extreme weather conditions * Rugged, durable construction * No hazardous materials used * No laser emission that could be harmful to your eyes * Mechanical switch for speed and reliability * Increased aiming confidence * Reduced training time and ammunition TECHNICAL SPECIFICATIONS OPTICAL DATA * System Passive Red Dot Collimator * Reflex Sight * Magnification 1X * Eye relief Unlimited * Reticle, size 2 and 4 MOA * * Optical coating Anti reflex ELECTRONIC DATA * Battery Type One 3 Volt Lithium battery type 2L76 or DL1/3N * Battery Life, typical** 50,000 hours at setting 7 out of 10, CompM3 = 500,000 hours at NVD setting * Switch, dot brightness 10 settings Off, 9 Daylight of which 1 Extra Bright MECHANICAL DATA * Material housing Extruded, high strength aluminum * Surface finish Hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black * Material lens covers Thermoplastic elastomer, black, non-glare finish * Adjustment 1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds * Mounting 1 ring, 30 mm or Aimpoint QR DIMENSIONS * Length 130 mm(5.1) * Width/height 55 mm x 55 mm (2.2x 2.2) * Ring width 30 mm * Weight 220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz) ENVIRONMENTAL DATA * Temperature Range -45 o C to +71o C (-50 o F to +160 o F) * Water resistance 45 m (135 ft) * *MOA (Minute Of Angle) 1 MOA = 30 mm at 100 meters = 1" at 100 yards I'm asking $530 shipped. Thank you for looking.