close

Privacy guaranteed - Your email is not shared with anyone.

Need load data for a G30

Discussion in 'Reloading' started by Mr981, Nov 11, 2011.

  1. Mr981

    Mr981

    Joined:
    Dec 27, 2000
    Messages:
    2,491
    Likes Received:
    500
    Location:
    N. Central OH
    I'm about ready to load a batch of Berry's plated 230 gr RN for my G30, but having changed my PC. my load data got lost in the switch.

    I'm using titegroup; IIRC, it was around 4.6 grn but not positive, with a OAL of about 1.20".

    Would appreciate any load data for this round through a G30 using Titegroup; thanks in advance for any help.
     
  2. F106 Fan

    F106 Fan

    Joined:
    Oct 19, 2011
    Messages:
    8,186
    Likes Received:
    354

  3. tjpet

    tjpet

    Joined:
    May 14, 2001
    Messages:
    2,969
    Likes Received:
    1,352
    Location:
    Utah-Idaho border
    Try 4.5grs. of WST.
     
  4. DoctaGlockta

    DoctaGlockta

    Joined:
    Jun 16, 2009
    Messages:
    2,110
    Likes Received:
    0
    Location:
    FEMA Region IV
    6.0 grains of Unique.
     
  5. Mr981

    Mr981

    Joined:
    Dec 27, 2000
    Messages:
    2,491
    Likes Received:
    500
    Location:
    N. Central OH
    I've been there and that's a good starting point but would guess that's using a full size 1911 for the specs; the G30 velocity would be lower.
     
    Last edited: Nov 12, 2011
  6. Colorado4Wheel

    Colorado4Wheel

    Joined:
    Nov 2, 2006
    Messages:
    14,993
    Likes Received:
    221
    Location:
    CO
    Are you chasing some phantom velocity? Your just going to have to work it up again. 4.8 grs is only .2 grs below MAX as far as Hodgon is concerned.
     
  7. F106 Fan

    F106 Fan

    Joined:
    Oct 19, 2011
    Messages:
    8,186
    Likes Received:
    354
    But you have already said what bullet you are going to use and you have already selected a specific powder. All the Hodgdon data will provide is a range of safe loads.

    Richard