close

Privacy guaranteed - Your email is not shared with anyone.

Match grade slide lock (revisited)

Discussion in 'Gun-Parts & Access.' started by TexasPOff, Apr 3, 2008.

  1. Ticman

    Ticman

    Joined:
    Jul 25, 2008
    Messages:
    845
    Likes Received:
    5

    If you haven't tried the MGSL and actually seen what it does.. Well.....
     
    Last edited: Nov 23, 2009
  2. T. R. Graham

    T. R. Graham The Glocksmith

    Joined:
    Sep 12, 2001
    Messages:
    198
    Likes Received:
    0
    Location:
    Texas
    Hmm....

    Since I started making the MGSL back in 2001, a whole number of people have used them to improve the accuracy of their Glock pistols. And some people were quite skeptical at first.

    However, many of those folks have been repeat orders.

    I have a 100% satisfaction guarantee on my MGSL, and a no BS policy. If anyone has any problem, they get a full refund - including the shipping costs.
     
    Last edited: Nov 23, 2009

  3. TexasPOff

    TexasPOff "Dump The Hump"

    Joined:
    Jun 13, 2006
    Messages:
    1,899
    Likes Received:
    323
    Location:
    The Great State of Texas
    I can personally recomend this part and Mr Graham as first rate. I have yet seen ot talked with anyone who has not invested in the MGSL and not been satified. TXPO
     
  4. Jim S.

    Jim S.

    Joined:
    Dec 2, 2008
    Messages:
    4,767
    Likes Received:
    3
    Location:
    Northwest Indiana
    I have a problem.
    I want to change out that piece of crap slide lock in my 36 but I don't have the means to make one myself. :supergrin:
    I'm relying on a talented machinist who makes them for every other Glock, but the 36.
    Help Mr. Wizard...
     
  5. JBP55

    JBP55

    Joined:
    Mar 4, 2007
    Messages:
    9,748
    Likes Received:
    327
    Location:
    Louisiana
    Just buy one and have a local machinist make one like it for the G36.
     
  6. Jim S.

    Jim S.

    Joined:
    Dec 2, 2008
    Messages:
    4,767
    Likes Received:
    3
    Location:
    Northwest Indiana
    Could you imagine what that would cost?
    Mr. Graham already knows how to make these, has the equipment to make them. Makes them for the other Glocks and probably doesn't see the demand being worth the cost of making them for the 36's.
    I tried to get other 36 owners on this forum to get together on this, but it didn't happen. Too bad.
    I know the value of this piece. I have one on my 21SF. In my opinion it is the most important piece to improve on in a Glock. Not many aftermarket items actually improve the shooting of a Glock. This one does.
     
  7. flynshoot

    flynshoot N Glock I Trust

    Joined:
    Apr 10, 2007
    Messages:
    62
    Likes Received:
    0
    Mr. Graham is a stand up guy. He stands behind his products and will make it right if you have a problem based on my experience.

    fNs
     
  8. dne752

    dne752 Mad Catter

    Joined:
    Jan 11, 2009
    Messages:
    3,246
    Likes Received:
    0
    Location:
    Texas

    A very satisfied customer!
     
  9. jhayesvw

    jhayesvw

    Joined:
    Jun 2, 2009
    Messages:
    400
    Likes Received:
    0
    Location:
    Tucson AZ
    are these still being made?
    anyone have target group pics side by side?

    thanks
     
  10. Jim S.

    Jim S.

    Joined:
    Dec 2, 2008
    Messages:
    4,767
    Likes Received:
    3
    Location:
    Northwest Indiana
    If you understand the important role the slide lock plays in stabilizing the barrel as the round is fired, and if you could see the difference in quality from the Graham part compared to the stock part you wouldn't need to see any target groups or anything else. You will have to trust those of us who use this part over the stock part when we say that it is probably the most important change you could make to a Glock that actually does something.
    Google the man and order one. You won't be sorry.
    If your listening Mr. Graham, I'm still waiting (pleading) for you to make one for a G36.
     
  11. TTAC

    TTAC

    Joined:
    Feb 8, 2004
    Messages:
    61
    Likes Received:
    0
    Ordered three yesterday. looks like just the ticket to tighten groups without going to a After market barrel
     
  12. FoxOneHaji

    FoxOneHaji

    Joined:
    Jan 31, 2008
    Messages:
    55
    Likes Received:
    0
    Location:
    Central Valley, CA
    I sent out the payment for mine today. :)
     
  13. TTAC

    TTAC

    Joined:
    Feb 8, 2004
    Messages:
    61
    Likes Received:
    0
    I installed one today in my G26,G19,and G17. I was lucky as the three Glock parts I pulled out all had wear in their centers, But the parts are stamped and they arn't shaped perfect.
    The new ones from Mr. Graham are precise, fit better, and I really like the fact that they extended out the sides a hair more than the factory part, making takedown much easier.
    I will report back when I get a chance to shoot them as to changes in accuracy.
    I did recenter all three rear sights in their dovetails as all three Glocks shoot to the right for me ( I'm left handed ) and this part is suppose to fix this.
    I may have to buy acouple more to drop in the parts box for later projects.
     
  14. ChCx91

    ChCx91

    Joined:
    Jul 27, 2009
    Messages:
    59
    Likes Received:
    0
    This thing is no joke! I'm nailing center mass without much trouble at 25 yards with a G26. Once I buy my G19, this is the FIRST aftermarket part I'm ordering. I'm satisfied with the one in my G26 and I KNOW I will be satisfied with any further purchases. Good job Mr. Graham!
     
  15. rsm688

    rsm688

    Joined:
    Jan 21, 2007
    Messages:
    305
    Likes Received:
    0
    I have one in every single one of my glock's now. By far THE BEST glock mod for your money, helps my suppressed glocks be a little quieter and increases accuracy
     
  16. gchild00

    gchild00

    Joined:
    Dec 24, 2008
    Messages:
    83
    Likes Received:
    0
    Just mailed my order today and will shoot with stock parts this weekend then when I get it I will shoot with the mgsl and try and post pics comparing the two. Now I'm no expert marksman. I'm cross eye dominate so most of my shots tend to go to the left. Looks like the mgsl will fix this. In addition to the mgsl I will also have installed the steel guide rod from arotek with the stock recoil spring and have the brass Seattle slug installed in the opening of the grip. I will be shooting a Gen 3 glock 23.
     
  17. rsm688

    rsm688

    Joined:
    Jan 21, 2007
    Messages:
    305
    Likes Received:
    0
    The MGSL will not fix shooting problems due to the shooter. If you want to fix that youll need some adjustable sights to adjust for your leftward shots

    The MGSL increases the accuracy of the gun, not the shooter

    -spencer-
     
  18. gchild00

    gchild00

    Joined:
    Dec 24, 2008
    Messages:
    83
    Likes Received:
    0
    I bet it will if the cause of me shooting left is due to a faulty stock slide lock..like discussed in previous posts on this thread about the mgsl...we'll see:whistling:
     
  19. rsm688

    rsm688

    Joined:
    Jan 21, 2007
    Messages:
    305
    Likes Received:
    0


    you said your cross eye dominant so you tend to shoot left, therefore I assumed that was why your gun is shooting left. If you shoot left with all your guns then the problem is you, if just your glock shoots left then maybe the MGSL will help :tongueout:
     
  20. TTAC

    TTAC

    Joined:
    Feb 8, 2004
    Messages:
    61
    Likes Received:
    0
    Shot my Glock 19 with the new Slide lock in it today. Wow! big improvement in the groups getting tighter and centered.
    Well worth the $30 asking price. I already sent a check for two more just to keep in my parts box.