close

Privacy guaranteed - Your email is not shared with anyone.

Looking for glock rail to picatinny adaptor.

Discussion in 'Gun-Parts & Access.' started by orangeride, Sep 26, 2012.

  1. orangeride

    orangeride

    Messages:
    600
    Likes Received:
    20
    Joined:
    Oct 19, 2011
    Last night I spent some time searching but to no avail. Really the only thing I could find was for non railed glocks. I have several different picatinny and weaver type lights and lasers I'd łike to put on my 20sf. Any leads would be nice. Thanks.
     
  2. toshbar

    toshbar Timber Baron

    Messages:
    4,148
    Likes Received:
    14
    Joined:
    Oct 20, 2009
    Location:
    Eastern NC
    How about a picatinny riser? the glock rail is essentially a picatinny without the cross groves, so a picatinny riser should clamp over it.

    Something like this:

    [​IMG]


    You would only be able to use one of the bolts to clamp it on since they have to go in the cross groves of the rail, which the glock only has one near the front.
     
    Last edited: Sep 26, 2012

  3. orangeride

    orangeride

    Messages:
    600
    Likes Received:
    20
    Joined:
    Oct 19, 2011
    That's a great idea. I've got a couple of those on a flat top AR. Tonight ill have to pull one and check.
     
  4. TRX450R_Racer

    TRX450R_Racer Punisher

    Messages:
    738
    Likes Received:
    0
    Joined:
    Jun 2, 2009
    Location:
    South Florida
  5. 123Bang

    123Bang 123Bang

    Messages:
    170
    Likes Received:
    84
    Joined:
    Sep 26, 2012
    Location:
    Lower Bucks, Pa
    I was thinking about cutting some grooves in the rail of my Gen3 model 23. It would require removing and relocating the metal strip bearing the frame serial number. A violation (removing/defacing serial number) might be the conclusion of a John Wayne-type BATF agent or a super-cop. Has anyone relocated that strip? Would it be practical? Would it be legal?
     
  6. ejes

    ejes

    Messages:
    124
    Likes Received:
    1
    Joined:
    Mar 29, 2009
    Last edited: Oct 7, 2012
  7. M 7

    M 7

    Messages:
    1,425
    Likes Received:
    52
    Joined:
    May 22, 2012
    Probably not worth it because-

    1.) the serial number placard is molded deeply into the frame and extends farther out into the frame material which means its gonna require removal of more material than you may want to remove

    2.) ATF will probably take a dim view of the procedure- defacing/altering a firearm's serial number is covered under 18USC922(k)- even if you replace/restore it elsewhere on the frame- not worth the risk IMHO. :dunno:

    I'd sure hate to see one get "trick bagged" over something like that and possibly lose their freedom.
     
    Last edited: Oct 7, 2012
  8. toshbar

    toshbar Timber Baron

    Messages:
    4,148
    Likes Received:
    14
    Joined:
    Oct 20, 2009
    Location:
    Eastern NC
    Alter the light instead. It would be easier to remove the cross piece molded into the light than to cut grooves into the frame. And you don't have to alter the gun/serial.
     
  9. TRX450R_Racer

    TRX450R_Racer Punisher

    Messages:
    738
    Likes Received:
    0
    Joined:
    Jun 2, 2009
    Location:
    South Florida
    ...................
     
    Last edited: Aug 14, 2014