Glock Forum - GlockTalk banner

1 - 20 of 73 Posts

·
Registered
Joined
·
496 Posts
Discussion Starter #1
I'm sure this has been posted before but I can't find it on the site. So, let's start over again (Hey, I'd like to know what some want!).
If money and the law were no obstacle, what kind of Glock would you have? Describe it as thoroughly as possible including caliber, materials used and accessories (not including holsters)

Me? I'd love to have a Glock 18. The slide will be about a half inch longer so a spare magazine can be inverted to fit in a groove underneath. This doubles as a front vertical grip. It'll use 33-round magazines but I'll also have a 55-round drum to start out with. :supergrin: To keep weight to a minimum, it will have a rear tritium circular sight and a standard front post to make sight acquisition faster. It will have a select-fire switch: semi auto or complete full auto! All parts are made from the same materials as the slide for longer life and it'll have a magazine feed jacket. I wouldn't mount any tactical lights since it'll already weigh quite a bit.

What's your dream Glock?
 

·
Registered
Joined
·
496 Posts
Discussion Starter #3
But surely, you'd probably mod it a bit. Wouldn't you love to have a drum on the thing instead of the puny little 33-rd magazine?:rofl:
 

·
Registered
Joined
·
986 Posts
Full auto G20 and drum mag... And 1 billion rounds of ammo..:supergrin:

Realisticly, a G29 and a CCW would suffice..
 

·
Banned
Joined
·
3,084 Posts
Full auto Glocks are useless, unless you just want to burn ammo!:cool:

I would rather just have 1 of each model.....:wavey:
 

·
Registered
Joined
·
496 Posts
Discussion Starter #7
Full auto G20 and drum mag... And 1 billion rounds of ammo..:supergrin:

Realisticly, a G29 and a CCW would suffice..
So, let's figure a rate of fire of 1,200 rounds/min. With a billion rounds, you fire nonstop for 8 hours maximum (with rest stops between). Mumble, mumble, maybe about 4-5 years worth of ammo!
 

·
Registered
Joined
·
735 Posts
A G34 without the silly cuts in the top of the slide, with a factory 5.5lb trigger, XS Big Dots, heat checkered grip panels, ambidextrous mag release. Low profile mag funnel. Not futzing with internals. To the front I'd have either an Insight M3X or a SureFire X200 weaponlight. THat's it.
 

·
GLOCK 20SF 10MM
Joined
·
639 Posts
If your going to have a G18, forget full auto, not useful...Make it with 3 shot burst...and a forward vertical grip...Beretta 93R is best pistol of that type now on market-3 shot burts & vert grip=CONTROL!
 

·
I. B. Glockin'...again. :^)
Joined
·
1,735 Posts
You may all call me LUCKY! I have the Glocks of my dreams: 23, 21, 17, and 36. Don't get me wrong now, I'd love to have ALL the Glocks but these are the ones I really want the most. Each one has a specific purpose and need and each one, in it's own special way, is my favorite.
 

·
Registered
Joined
·
120 Posts
I have my dream Glock, my G29
 

·
Game Master
Joined
·
1,098 Posts
A 36 whose <grip> extends to the base of the mag, or at least offer flush fitting baseplates for the 36 as it is.
 

·
Paper Killer
Joined
·
3,065 Posts
I would have the "porcelain gun that costs more than you make in a month."

Seriously- I would probably send my G23 to Robar and have a trigger job done, round out the trigger guard, bevel the front of the slide, install a match grade barrel finished in NP3, retaining the factory barrel, have the grip stippled, XS 24/7 Standard Dot sights installed, Maybe have front cocking serrations and finish the pistol with NP3 on inside parts. Not sure if I would send the pistol back to GLOCK to refinish the slide in Tenifer, or go with Robar's NP3. Would also ask the genie for a G27 in the same fashion, 15 magazines for each, and 2 billion rounds of 155gr Doubletap GDHP, along with 2 billion rounds of Hornady 155gr TAP.
 

·
Casino Goon
Joined
·
1,766 Posts
A Glock with interchangable backstraps.
 

·
Paper Killer
Joined
·
3,065 Posts
Oh and I would ask the genie for an unlimited gas card and the end to "Free Kill Zones". Maybe a BMW M3 Sedan with machine-gun headlights. OOOOO I would also ask the genie to have Gaston Glock design a LONG RIFLE. I'm just curious as to what he would think up. I think that is like 5 wishes. Somewhere in there I would ask for more wishes.
 
1 - 20 of 73 Posts
Top