close

Privacy guaranteed - Your email is not shared with anyone.

Glock OEM + Extensions

Discussion in 'General Glocking' started by TeeJay37, Jul 21, 2012.

  1. TeeJay37

    TeeJay37

    Joined:
    Jun 4, 2012
    Messages:
    491
    Likes Received:
    1
    Should they have the little locking tab on the bottom? I just got one from Botash and it doesn't. By the way, I placed 2 orders from them in 2 days and they both took 4 days to get to me.
     
  2. JBS

    JBS

    Joined:
    Apr 4, 2012
    Messages:
    258
    Likes Received:
    0
    Location:
    TX
    Are you saying you did not get both parts?
     
    Last edited: Oct 30, 2012

  3. TeeJay37

    TeeJay37

    Joined:
    Jun 4, 2012
    Messages:
    491
    Likes Received:
    1
    No, I got both but the insert doesn't have the part that locks into the hole on the bottom.
     
  4. kodiakpb

    kodiakpb

    Joined:
    Jan 12, 2012
    Messages:
    2,185
    Likes Received:
    27
    Look at the picture that JB posted closely again. Do you see the channels on the side of the insert? That is how it locks in place. You still need to use a punch to push through the hole in the baseplate so the insert can align the channels and drop in place....or you may get lucky and it will drop perfectly in place after you slide the baseplate on.
     
    Last edited: Jul 21, 2012
  5. JBS

    JBS

    Joined:
    Apr 4, 2012
    Messages:
    258
    Likes Received:
    0
    Location:
    TX
    That is correct. The Plus + spring cup which is smooth on the bottom takes the place of the magazine insert used on a standard base. The slots in the spring cup engage ribs in the extended base.

    >>didn't know you where already on the answer Kodiakpb<<
     
    Last edited: Jul 21, 2012
  6. TeeJay37

    TeeJay37

    Joined:
    Jun 4, 2012
    Messages:
    491
    Likes Received:
    1
    Alright, thanks guys. I was just making sure they didn't send me a pierce or something.