Glock Talk banner

GLOCK 43 Recoil Spring?

844 Views 16 Replies 12 Participants Last post by  rpoL98
2
Needed a recoil spring for a 43 I had milled and bought one from EBay I have a couple others with just a stamp 1 1 on the end and this one has 1 0 1. Can’t find anything online so just want to make sure it isn’t a aftermarket as the description said OEM. Anyone seen this stamp before? Thanks
Finger Nail Bumper Wood Thumb
Wood Sleeve Finger Art Office supplies
See less See more
1 - 17 of 17 Posts
Needed a recoil spring for a 43 I had milled and bought one from EBay I have a couple others with just a stamp 1 1 on the end and this one has 1 0 1. Can’t find anything online so just want to make sure it isn’t a aftermarket as the description said OEM. Anyone seen this stamp before? Thanks View attachment 1173762 View attachment 1173764
Looks OEM. I'll have to get mine out and check shortly. If I don't respond or edit this, assume I checked and it's good.
  • Like
Reactions: 1
@Wakeboardaddict i just checked my older 43. The recoil spring is stamped 1 1.
  • Like
Reactions: 2
Checked mine, and @MattyGunz and I have the same one. Just a 1 on each opposite side.

Calling @GlockyQ ; Resident Glock 43 expert needed in General Glocking Section, Aisle 2. He's got like 4 Glock 43s to check LOL
  • Haha
  • Like
Reactions: 3
Just checked mine, 1 1 a!so.
  • Like
Reactions: 1
Same here just the "1, 1" on the sides no "0" on the bottom..Mine has the #'s stamped. OP are yours stamped or printed. Mine show know black in the #'s.

Michael
  • Like
Reactions: 1
@mcvoss judging by the pic, they look laser engraved. I could be wrong though, it’s not my spring.
My curiosity has gotten the best of me. Pulled out the 48 too, recoil spring is also stamped with a 1 1, no zero.
Same here just the "1, 1" on the sides no "0" on the bottom..Mine has the #'s stamped. OP are yours stamped or printed. Mine show know black in the #'s.

Michael
Almost looks like they’re laser etched. Not stamped like the other 2 I have with no 0. I just picked up a new 19C from my FFL and had the same etched style as the 43 so looks like it should be OEM. Just have never seen on stamped 1 0 1. Here’s my 19C
Finger Wood Thumb Button Household hardware
See less See more
Most of mine are 1 1, but I have couple that are 1 0 1. They are OEM.
  • Like
Reactions: 1
I've found 6 OEM RSAs for the G43 in my Glock parts box - two came in Austrian made G43s and 2 came with the USA made uppers and two I bought from Midway USA. They all have "1-1" stamped, but none of them had "1-0-1"....

I have also checked Glock FM72-26 Parts order Form (for Certified Armorer) dating back to October 2018 through the latest edition currently used. They all indicated that the Recoil Spring Assembly for G43/G43X/48 (Part #33379) is marked "1-1" not "1-0-1"....

My guess is that the RSA that the OP obtained is a variation of Glock OEM RSA for the G43 - possibly from the early time of the G43 (e.g., pre-2017) because the OEM RSAs that came in my pre-2017 Austrian made G43 already came with the RSA marked "1-1"....
[It is just my guess....]
  • Like
Reactions: 3
My Glock 43 was made in February 2016 in Austria and I have 1-1.

Attachments

See less See more
I just checked my two 43s plus the three spare RSAs and all are marked “1 1”. Not a “0” at all.
UPDATED
Blackphoenixcustoms was seller. Per auction you can return it.


Report him to ebay for fake item. Get your money back.

It was $10 because it wasn't real...HELLO
UPDATED
Blackphoenixcustoms was seller. Per auction you can return it.


Report him to ebay for fake item. Get your money back.

It was $10 because it wasn't real...HELLO
Actually it was 20.99 and no it was not them. If it is a fake it’s an almost perfect one down to every detail that I can see except the zero. Shot it today with 200 rounds without an issue. I will call Glock tomorrow and see what they say but somebody already posted they have one and it’s OEM.
  • Like
  • Haha
Reactions: 3
the one from my G43X is stamped 1 0 1. yes, it's OEM.
  • Like
Reactions: 2
1 - 17 of 17 Posts
Top