close

Privacy guaranteed - Your email is not shared with anyone.

Glock 32 to 9mm, how to?

Discussion in 'General Glocking' started by GL32, Jul 4, 2012.

  1. GL32

    GL32

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jun 19, 2012
    I have a gen 4 glock 32 and would like to be able to convert to 9mm for economical practice. I already have a .40 barrel along with the .357 sig barrel which came installed. How would I go about changing over to 9mm? What do I need besides a conversion barrel and what kind of barrel would be a good one? Or is this even possible? Need advise!!!
     
  2. Slotback

    Slotback Glock 35 Millennium Member

    Messages:
    748
    Likes Received:
    158
    Joined:
    Dec 23, 1998
    Location:
    Texas
    Lone Wolf Distributors. I just bought a conversion barrel from them. They strongly advise to get 9mm mags as well.
     

  3. tonyparson

    tonyparson

    Messages:
    5,079
    Likes Received:
    11
    Joined:
    Jan 20, 2008
    Location:
    Dayton, TN.
    You will need a G19 mag and some will say to get a 9mm extractor and ejector, but I've never had to have one. I only use mine for range use. Out of probably 5000 rounds never had a hiccup using the extractor and the ejector that came in the G32..
     
  4. larson1122

    larson1122

    Messages:
    1,801
    Likes Received:
    0
    Joined:
    Jan 30, 2012
    Location:
    Minnesota
    Try it out using the conversion barrel before changing anything else. There are plenty of reports out there of people using the original .40 extractor, ejector, magazines etc. without having any issues.


    Outdoor Hub mobile, the outdoor information engine
     
  5. hokieglock

    hokieglock Proud Infidel

    Messages:
    1,590
    Likes Received:
    1
    Joined:
    Jul 27, 2005
    Location:
    rommel,reina and samson's den
    this, and 9mm mags. this is what i have for my g22 and runs flawless. don't bother with anything else.
     
  6. barth

    barth six barrels

    Messages:
    7,519
    Likes Received:
    1,831
    Joined:
    Oct 7, 2011
    Location:
    The Free Zone
    +1 on just conversion barrel and 9mm mags.
    +1000 flawless 9mm JHP rounds
    with a Storm Lake 40-9mm barrel and G26 mags in my gen 3 G27.
    Plus if you change to 9mm ejector/extractor
    you can forget easily swapping barrels and mags to go back to 40 or 357.
     
    Last edited: Jul 4, 2012
  7. hulk2k8

    hulk2k8

    Messages:
    120
    Likes Received:
    0
    Joined:
    Nov 16, 2008
    Since it's a Gen4, will the RSA be an issue?