Glock 29 issue...

Discussion in 'General Glocking' started by Critch, Sep 26, 2020.

  1. Critch

    Critch

    Messages:
    2,070
    Likes Received:
    5,788
    Joined:
    Jun 21, 2007
    Location:
    SwampEast, MO
    I was shooting my G29 Gen 4 today and I noticed that the upper (smaller) pin was working out the side. Is there a quick fix for this..I was thinking some Blue Loctite..

    I've never encountered this with any other Glock.
     
  2. Duck of Death

    Duck of Death

    Messages:
    2,808
    Likes Received:
    391
    Joined:
    Apr 12, 2002
    Location:
    Big Sky Country
    "QUOTE"
    I was thinking some Blue Loctite

    NO--take the pin out & re seat it, they are ridged & will not move if seated properly.
     

  3. Critch

    Critch

    Messages:
    2,070
    Likes Received:
    5,788
    Joined:
    Jun 21, 2007
    Location:
    SwampEast, MO
    Okey dokey....
     
  4. FoatieFiveACP

    FoatieFiveACP

    Messages:
    88
    Likes Received:
    88
    Joined:
    Aug 16, 2020
    I would make sure that it is centered in the hole, lengthwise (same amount of space on each end), which would be re-seated correctly, as mentioned above.

    Warning: Do not ever get Loctite on most polymers. It can react with it and can cause the polymer to crack. I have learned that the hard way, but not on Glocks. If the pin keeps creeping out, a safer method would be to dab some clear nail polish on the ends of the pin, inside the hole on either side.
     
    Critch likes this.