gen 4 trigger housing

Discussion in 'General Glocking' started by FYRELT, Sep 8, 2018.

  1. FYRELT

    FYRELT

    Messages:
    495
    Likes Received:
    124
    Joined:
    Apr 14, 2005
    Location:
    TENNESSEE
    I have a gen 3 19 with the 336 ejector , I want to change it out to the 30274 that is in the gen 4 , will the gen 4 trigger housing fit in the gen 3 gun
     
  2. ken grant

    ken grant

    Messages:
    2,399
    Likes Received:
    940
    Joined:
    Apr 3, 2004
    Location:
    middle ga.
    NO ! Remove the ejector from the Gen. 4 housing and install it in the Gen. 3 housing .
    I have done it on several pistols .
     

  3. Mike-M

    Mike-M

    Messages:
    6,836
    Likes Received:
    8,418
    Joined:
    Dec 15, 2012
    It may be worth buying the latest Gen5 TMH 47208 and removing its Ejector 47021 for use in your Gen3 TMH 322 in place of Ejector 336. There have been reports that Ejector 47021 produces even better results than Ejector 30274.

    I don't do 9x19mm, so I haven't tried this.
     
    Last edited: Sep 8, 2018
    voyager4520 and L-2 like this.
  4. FYRELT

    FYRELT

    Messages:
    495
    Likes Received:
    124
    Joined:
    Apr 14, 2005
    Location:
    TENNESSEE
    thanks guys , I ordered a gen 5 tmh for the ejector
     
    Mr Meeseeks likes this.
  5. Mike-M

    Mike-M

    Messages:
    6,836
    Likes Received:
    8,418
    Joined:
    Dec 15, 2012
    There are two Gen5 TMHs:

    33854 with 30274 ejector - standard on Gen5 G17 and G19

    47208 with 47021 ejector - standard on Gen5 G19X, G26, G34

    I suspect that one day the 47208 will be standard on all Gen5 models.

    The Gen4 30275 TMH also comes with the 30274 ejector.
     
    voyager4520 and L-2 like this.