G35 Open Gun w/Trijicon RMR melt mount.

2485 Views 2 Replies 3 Participants Last post by bentbiker, Nov 17, 2010

Wildkow

Discussion Starter · Nov 17, 2010

Here's my Glock 35 Open w/Trijicon RMR

Glock 35
Trijicon RMR RM02 8.0 MOA LED
GhostInc Rocket 3.5 lb Trigger
Glockworx ZEV Tech Titanium Firing Pin Safety
KKM Precision Glock 35 357 SIG Drop-in w/ 4 Port Comp
Lone Wolf G35 slide
"Melt In" milled for Trijicon RMR
Forward Mount
Taylor Freelance GOLD ADVANTAGE Glock +5 floorplate w/Spring x2
Prezine Magwell

I bought enough parts from LWD so that I have two complete slides. I can now shoot Open with the LWD slide w/RMR and Limited or Production sans magwell with my stock Glock 35 slide. That's why I only order the +5 Taylor Freelance floorplates. Later I hope to get the +8's and maybe a Dawson ICE magwell. I have Dawson sights on the G35 slide and will probably put the same on the LWD Open slide as backups but for now I'm out of money. LoL!

The only problem I think is with the forward mount, I wanted this for the longer sight picture, the cut extends into the firing pin safety plunger tube spring thingy area sorta, did that make sense? :blink:

See less See more

Save

1 - 3 of 3 Posts

rca256

· #2 · Nov 17, 2010 (Edited)

Very nice.

I sometimes shoot my G27 with a LWD 40-9 conversion barrel plus a G26 extractor and have thought about just building a complete LWD upper for the 40-9. What was the ball park cost for all of the little bits inside of the upper?

Edited to ask is the picture of the red dot really the 8 MOA LED? The graphic in the linked page looks much bigger than the actual red dot is why I wanted to ask.

Save

bentbiker

· #3 · Nov 17, 2010

rca256 said:
Edited to ask is the picture of the red dot really the 8 MOA LED? The graphic in the linked page looks much bigger than the actual red dot is why I wanted to ask.

The graphic appears to show how big it appears at 100 yds -- 8". At 5 yds it is only .4" . It works great at distances of 25 yds or less.

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month