Stovepiping fate help!! Have run 3 diff loads thru it. 3 consecutive is the best I get. Been shooting glocks over 25 years & cant even recall an for. Help. It has to be extractor prob right?. This is not a traditional prob. In my experience they eat anything everytime.
Nothing makes sense stovepipe, fate & brass Ejection? Are you still out there? Fte. There goes my text again. Gotta figure out how to change. Driving me nuts, just like this gun
I am in komifornia but yes I ran 8 10 rounders plus a 17. Same results. Seems to be chewing a little on the upper left top of all mags? All brand new factory glock mags. Am totally baffled. Glocks dont do this!
Funny thing first time out a brother at the range gave me 5 115 blazer fmj. Flawless cycling. Thats why i tried different loads. But tossing brass down my front chest. Extractor probs.should be 2 to 3 o'clock eject angle
When I, and 3 certified Firearm Instructors, got repeatedly pelted in the face with brass with my GEN 3 G19 (wasn't a grip or ammo issue), I upgraded to the Gen 4 30274 ejector (you need to buy the GEN 4 Trigger Mechanism Housing and pull it out) and the non-LCI SLB. This took care of the BTF and brass down the shirt on the G19. When I got the G17 I immediately installed the same parts in it. The other day I shot Magtech 115gr FMJ and the brass ejected appropriately to the side on both of them. No extractor swap to the Apex extractor needed as of yet.
Do you have a one part #. I am so frustrated. Glocks simply don't do this. Gonna call glock monday. Seems like they should cover any repairs, but downside is looking the gun for weeks. Local shop where purchased has lifetime warranty coverage but no smith. Only one smith in this town & i am not sure if he is glock certed, but you can imagine his backlog. Thnx so much for the help. I just can't believe this possible from a GLOCK
Thnx so much. Just came from the local shop where i purchased that has an indoor range. Ran 60 thru it with a slide spring change & seems to be functioning full battery. Back to my membership range monday. So will tell all. I have 3 ar match just finished barrel season yesterday & got one dialed in good off the sled. 2 to go. Ran out of right windage for some reason so shimmer right rear 20moa & left front same. Turret was bottomed out? For windage. Very strange as I only use vortex matched pair rings.
Thnx for the help. Will know monday
Peace and Love Christifer shoot tight
Was given to me from glock forum. Ccr. Cummings custom refinishing. Very good rep. 3 to 4 month lead time. Google Ccr should get you a link to the page. Was reccomended here when i was debating a color contrast. Don't know how to find it. My post was to plate or not to plate. Something like that. So a member reccomended. Its the cc2 finish i think i chose. Like a full ss finish. Will see if i can find the page. But pretty sure I googled ccr
I stripped the entire slide. Yes I agree gonna put 3. 4 hundred thru monday. I've got all day at the range. With lots of work. This one i am just going to burn lead. I will dial it in next week after I get those through. Just going after perfect full battery. Will aim later lol
Well actually it is or it would be glock black nitride. Glock uses a different name but to my knowledge its the same. However after a trip to the gunshot today & 50 rounds it seems to be cycling full battery. I will know for sure monday evening. When home from range. Not a member there but that was point of sale & any firearm purchased from them has lifetime warranty. Even though I just picked this up from the 10 day about 3 weeks ago. Will keep you posted. Gonna just burn some lead. I think it has allready corrected itself. Just need to break in the plating even as micro thin as it is. I ran a completely diff slide with 13lb slide rode spring & seems fine.
I had the 11lb with drop in kkm threaded with compensator. Changed it to the 13 last nite & was fired for about 50 red with that barrel & wilson match. Seems to be running nice now. Back to range monday. Will tell all. Breaking in 5 seperate guns at one time is a chore. 3 match at. Plus this & a spectre 80 i built for fun. At is ar f ing text. Cant figure out how to fix. Spells own words.
Monday will tell all. Think the 17 is fixed. Be back on forum monday evening
This is the best site ever. So much knowledge. So much support. Think I may have helped a couple myself. Allways good to help fellow brothers
Peace and Love Christifer shoot tight
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Glock Talk
21M posts
185.2K members
Since 1999
A forum community dedicated to Glock firearm owners and enthusiasts. Come join the discussion about optics, gunsmithing, styles, reviews, troubleshooting, accessories, classifieds, and more!