[mudrush]

Does anyone know what kind of chamber support the Fusion 'Traditional Hunter' w/6" barrel has?

Thanks

 

[OregonG20]

PM the member nickE10mm, he owns one.

 

[nickE10mm]

I've got one.... It seems to be extremely well supported. Also, I've measured the diameter of the chamber to be about .427 at the max which I believe to be right in line with the other fully supported barrels I've used or seen (LW, etc). PM me or post here and I can take any other measurements you'd like.

FWIW, I've never seen anything even close to resembling a smile or bulge. I've went up to the following (with new Winchester brass and CCI300 primers).

200gr XTP over 9.5gr 800X
200gr WFNGC over 9.7gr 800X
200gr XTP over 8.2gr LS (will work up more)
135gr Nosler over 13.0gr 800X
and many others

Using a 20 and 22lb recoil spring, as well.

Let me know if you need any other measurements...

 

[mudrush]

I've got one.... It seems to be extremely well supported. Also, I've measured the diameter of the chamber to be about .427 at the max which I believe to be right in line with the other fully supported barrels I've used or seen (LW, etc). PM me or post here and I can take any other measurements you'd like.

FWIW, I've never seen anything even close to resembling a smile or bulge. I've went up to the following (with new Starline and CCI300's)

200gr XTP over 9.5gr 800X
200gr WFNGC over 9.7gr 800X
200gr XTP over 8.2gr LS (will work up more)
135gr Nosler over 13.0gr 800X
and many others

Using a 20 and 22lb recoil spring, as well.

Let me know if you need any other measurements...

Thanks, That is what I was interested in. I thought you had one.

I have a customer that wants to shoot some hot stuff but I wasn't sure if he could since I don't have a bad boy Fusion pistol.