close

Privacy guaranteed - Your email is not shared with anyone.

FS/FT - A bunch of custom/prod. tacticals -

Discussion in 'Sold/Expired' started by Howling Moose, Aug 8, 2002.

  1. Howling Moose

    Howling Moose

    Messages:
    69
    Likes Received:
    0
    Joined:
    May 23, 2001
    Location:
    Loveland, CO
    These custom and production blades are all priced very resasonably...I would prefer to sell each outright as I have a teens' braces and a 5th anniversary to pay for (guys, you know what I'm talkin' about)...there are a limited # of blades I would consider in trade - certain Busse's, Strider's and Mad Dog's, Mayo's...and, of course, I'm lookin' for a G-23 nib. or lnib. :D

    - Greco LaDuena -
    OAL: 15 5/8" - Weight: 19oz - Blade 9" of 8670 steel, hand ground, black powder coated "bolo"._Black Micarta scales with stainless hex screws._Thumb notches above the integral guard for enhanced grip and control. Lanyard holes below the guard and pommel._Ships with a hand fitted Kydex lined leather sheath. nis. $240
    Photo:
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12798893

    - Gary Bradburn "All American Fighter" -
    A one-of-a-kind custom offering from Gary Bradburn. A2 steel, 13.25" OAL, 8" blade length with 5" false top edge (can be sharpened if desired), 600 grit handrubbed satin finish, olive drab canvas Micarta handles with stainless pins and lanyard hole, and tight-fitting Black Concealex multi-position sheath. 99+% nis. - $225 ($100 off my cost)
    Photo:
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=11892794

    - Greg Lightfoot Sierra Light -
    (designed and made by Greg Lightfoot for Law Enforcement/Special Op's covert application in Canada)
    OAL: 9.0" - Blade _4 5/8" BG-42 Steel, _beautiful Satin Finish, 3.5" sharp top edge, serrated thumb ramp, full tang. _Black Micarat handles with deep finger grooves, Deep Finger Grove, Multi-Carry Concealex Sheath. nis $295 & s/h
    Photo:http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12891752

    - Dick Atkinson Fixed Blade Fighter - 440C
    Atkinson is well known for his big, tough folders...including the detained filework. This Atkinson (lg) tactical fighter is no exception - 9.75" OAL, 5" blade of 440C stainless, double hollow-ground with 3.75" sharpened top edge (and I mean SHARPENED) - and detailed filework on the thumb ramp. Polished black linen Micarta scales with red spacers, brass pins, and finger grooves make this a handling dream in regular or reverse grip. Form fitted "Little Horn" black leather sheath by Jack Ellsworth. unused/uncarried - $135 ($45 off cost)
    Photo:
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12343286

    Al Polkowski "Warthog" -
    Blade - 4" double hollow ground, double-edged, bead blasted ATS-34 fighter blade with integral single guard and serrated thumb ramp. Green & black G-10 scales over the skeletonized handle with a skull crusher and thong hole. Comes with a custom Kydex rig...nis. $240 ($55 under cost)
    Photo: (by John Greene)
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12326342

    - POLKOWSKI "BODYGUARD" System -
    Single Edge ATS-34, Bead Blast Finish, Black G-10 Handles - 8.25" OAL, 3.75" Blade - IWB Kydex sheath, "small of the back" Kydex sheath, & Kydex neck sheath...unused, uncarried - (with Al's sharp edge the hair is literally "intimidated" off your arm!) $ 210.00
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12264351

    - Polkowski "New Ghost"
    Specs: OAL 8", blade 3.75", double hollow ground fighter style blade, integral double guard, black G-10 scales, full tang, single edge, ATS-34, bead blast finish, two finger grooves on handle and thong hole, Kydex IWB belt sheath. $195 ($40 off cost)
    Photo:
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12658898


    MOD CQD - Mark V ATAC - Blade of the Year. OAL: 12.75, Handle Length: 5.25", _Blade Length: 6.75", Blade Material: Carbon Steel, Handle Material: Zytel with WingWalk inserts and comes with a jump-qualified Kydex sheath. - It is the battle implement you can depend on when you run out of bullets, or when shooting is just not appropriate. Designed to dominated and deliver in any situation, the CQD® Advanced Tactical Fighter offers a multitude of operational capabilities. High carbon steel with a titanium carbo-nitride finish provides the ultimate sharpness as well as the toughness necessary in field applications. _nib $230 (retails $325)
    Photo:
    http://members12.clubphoto.com/_cgibin/members/compact_slide_show.pl?album_item_id=1140574

    - Wilson Tactical Model 4
    The Model 4 has been made as slim as possible for inside the waistband carry._ With it's inside the waist sheath, it carries nicely in the front or the small of the back._ The Model 4 is hollow ground of D2 with a false edge on top._ The full tang design offers maximum strength and a perfect balance._ The unique handle design gives you a positive grip and prevents your hand from slipping._ The Model 4 is ideal for daily carry when concealability is a must. Bead-blasted, OAL 8.75", blade length 4.75", thickness 11/64" of tough D2 steel, hardness 62-64rc, Micarta handle, and comes with the IWB Kydex sheath. $185 (sells at $230 online)
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10753154

    - MOD CQD - AUTOMATIC - Bead blasted blade, straight - MOD multi-position sheath, warranty and all papers - nib. $210 ($110 under cost)

    - Greco-Lile "Probus" 6 - Tactical Fighter
    Blade Length - 6", OAL 12", Blade thickness .210", Steel 8670, Finish: Black UV rated polyester powder coat, Black Micarta handle, black leather sheath with retaining strap. A top rated tactical for cutting or penetration tasks - nib. collector no longer made - $135 ($45 under cost)
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10918533

    - SOG SEAL Knife 2000 - knife of the Navy SEALs. The 440A stainless steel blade is 7 inches long and a full 1/4 of an inch thick with a serrated section for improved cutting power. A gray, scratch- resistant powder coat helps protect the blade from corrosion. The contoured, glass reinforced Zytel handle provides a firm grip even when wet and has a lanyard hole. 12.25 inches long overall. Top quality Kydex sheath included. $110
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=11102302

    -TOPS Magnum Tanto M-711
    OAL: 10.625" - Closed: 6" - Blade: 4.75" Black Traction Coated - Thickness Blade - .175 Cryo Treated - Weight: 11 oz Blade Steel: 154 CM - RC 60 Blade Color: Handle Material: Heat Treated Aircraft Aluminum T-6 Handle - Liner Lock: Stainless Steel 17-4 - Sheath Material: Kydex Heavy Duty LBE Sheath Setup: Vertical or Horizontal Positioning - $165 ($45 under cost)
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=11223598

    - Cold Steel "Outdoorsman" - big, strong, wicked! $145 ($90 under cost)
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10443288

    - Rambo "First Blood" - 420-J2 steel, 14" OAL, 9" wickedly sharp bowie blade...hollow handle carries survival gear -carried, unused - a few small marks on the satin finish of the blade - leather sheath - $75
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10088615

    - CONDOR Model 79-Z
    A collectable from Seki Japan maker who left the scene years ago. OAL 9.5" with a 4.5" blade, double hollow-ground 3/16" stock, screaming edge...Zytel handle with lanyard hole - comes with tight-fitting nylon belt sheath...uncarried and unused...as nib. $50
    http://members1.clubphoto.com/_cgi-...=&lh=1024&lw=1360&cap=Condor&album_id=707453-

    - Spyderco Chinook - (straight edge) - handles any task in the field, nd a great protector! nib. $105
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=11088687

    - Cold Steel "Shinobu" folder - 8.25" OAL, 3.5" drop-point blade of SanMai III, Kraton handles and heavy duty Cordura belt sheath - as nis./unused,unmarked,uncarried. $85
    Photo:
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=12343287

    - Schrade Century Omega 7" fixed blade, part serrated..leather sheath $30
    - Cold Steel Recon Tanto (Carbon V) - $70
    - Kershaw Ken Onion "Echo" Fixed blade..leather sheath - $30
    - PUMA - Skinmaster...awesome skinner - Solingen steel, Kraton handle & nylon sheath. $55
    - Kershaw KC Lockback - serrated folder...a workhorse with nylon sheath...wicked $25
    - Bear Cutlery 8" Hunter - $25
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10412643
    - Bear Cutlery MGC HiTec Skinner $25
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10412644
    - CRKT Wind River Hunter Fixed blade - (2nd from top in picture) $25
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10444075
    - CRKT Sawtooth Hunter - (tp in picture) $25
    http://members12.clubphoto.com/_cgi-bin/members/compact_slide_show.pl?album_item_id=10444075

    Shipping additional...MO's preferred - PayPal adds 3%
     
  2. BilltheCat

    BilltheCat Quieter Cat Millennium Member

    Messages:
    1,599
    Likes Received:
    0
    Joined:
    Apr 4, 1999
    Location:
    Sanford, Florida
    the pic of the condor didnt make it. that is one I am interested in!

    any help?
     

  3. Glock4ever

    Glock4ever

    Messages:
    2
    Likes Received:
    0
    Joined:
    Sep 2, 2000
    Location:
    St-Jean, Quebec
    I am interested in your folder and I was wondering if you would consider a straight trade for the MOD CQ DIETER (auto) for a MOD ATAC V dieter - same as the one that you have for sale, I think. Email me if you are interested...
     
  4. NoShoot

    NoShoot Enlightened One

    Messages:
    194
    Likes Received:
    0
    Joined:
    May 9, 2000
    Location:
    Gilbert, AZ
    I would like to see a pic of the Schrade Century Omega....
     
  5. Howling Moose

    Howling Moose

    Messages:
    69
    Likes Received:
    0
    Joined:
    May 23, 2001
    Location:
    Loveland, CO
    I have tried all the picture links, and they all work fine for me - if you'd rather, email me for pic's and I'll send 'em direct.

    The CONDOR pic is attached
     
  6. BilltheCat

    BilltheCat Quieter Cat Millennium Member

    Messages:
    1,599
    Likes Received:
    0
    Joined:
    Apr 4, 1999
    Location:
    Sanford, Florida
    wow. the cat is in lust. any info on the seki maker? and the steel used? etc. thanks!