close

Privacy guaranteed - Your email is not shared with anyone.

CCI 350's with AA9?

Discussion in '10mm Reloading Forum' started by 99blkta, Aug 31, 2010.

  1. 99blkta

    99blkta

    Messages:
    68
    Likes Received:
    0
    Joined:
    Jun 26, 2010
    Location:
    TX
    So Ive looked through the load data posted here on AA9 and noticed a lot of people using the mag primers with this powder. One of my manuals states to use the mag primer, the other does not, it suggests WLP's (which I know some say works for both).

    I'm wanting to work up some loads with this powder that I recently purchased. Should I use the magnum primers or not?
     
  2. Kegs

    Kegs Ol 8 fingers ;)

    Messages:
    2,712
    Likes Received:
    13
    Joined:
    Oct 26, 2009
    Location:
    Cold side of conus
    I most definitely would... Sets of 100 are cheap. Test both, compare and contrast! :supergrin:
     

  3. 99blkta

    99blkta

    Messages:
    68
    Likes Received:
    0
    Joined:
    Jun 26, 2010
    Location:
    TX
    Very true, and I have 1k of 350s and even more 300's. Now if I only had a chrono.....
     
  4. Taterhead

    Taterhead Counting Beans

    Messages:
    4,099
    Likes Received:
    502
    Joined:
    Dec 13, 2008
    Location:
    Boise, Idaho
    A9 is the one and only powder with which I use 350s - with good results. I've found 350s to be overkill with other powders though.
     
  5. 99blkta

    99blkta

    Messages:
    68
    Likes Received:
    0
    Joined:
    Jun 26, 2010
    Location:
    TX
    Thanks for the info. I tend to shy away from them as my experience with 800x and 350's has shown the most pressure symptoms of anything I've loaded so far. This wasn't extreme pressure symptoms, but a clearly visible albeit small glock smile (with a KKM barrel).
     
    Last edited: Sep 1, 2010