Glock Forum - GlockTalk banner

1 - 10 of 10 Posts

·
Registered
Joined
·
627 Posts

·
Registered
Joined
·
627 Posts
I checked out glockworx and googled jager and zev but couldn't come up with anything.
Just a thought, you might want to give the owner of that gun (you can get him on photobucket) and send him an e-mail.

I know it is not a Lone Wolf, so he will have to tell you. He might have had it custom made....
Good Luck...
:wavey:
 

·
Registered
Joined
·
944 Posts
IIRC that was a custom build and he also did the slide. Notice how the slide tapers in front of the forward cocking serrations to match the profile of the comp.

Very nice work.

HH

 

·
Registered
Joined
·
468 Posts
Discussion Starter · #6 ·
I'm going to be setting up my G23 for range use with a comp and KKM threaded barrel. I'm thinking about going with the Carver 3 port comp. The BB enterprise website displays both a 3-port and 4-port comp in .40 caliber. They recommend the 3-port for the G23, but not the 4-port. I would get the 4-port if it was recommended to make my pistol shoot even sweeter.

Would the 4-port work just the same on a G23 as the 3-port or would I run into problems?
 

·
Registered
Joined
·
13,492 Posts
seach on Brian Enos, can't remember who but the builder posted it there.
 

·
Biggest Member
Joined
·
2,541 Posts
That is a custom made compensator. Somebody with connections to a machine shop had it made...
 
1 - 10 of 10 Posts
Top