close

Privacy guaranteed - Your email is not shared with anyone.

Blackhawk Spec Ops stock on an Interstate Arms Hawk 982?

Discussion in 'Tactical Shotguns' started by 1bigtaco, Mar 12, 2010.

  1. 1bigtaco

    1bigtaco

    Messages:
    127
    Likes Received:
    0
    Joined:
    Dec 13, 2004
    Location:
    Alabama
    Have any of you guys ever installed a Blackhawk Spec Ops stock for an 870 onto a IAC Hawk 982 (870 knock off)? TIA
     
  2. Victoriagotagun

    Victoriagotagun

    Messages:
    1,673
    Likes Received:
    1
    Joined:
    Mar 5, 2007
    Location:
    California

  3. GTKAYAKER

    GTKAYAKER

    Messages:
    15
    Likes Received:
    0
    Joined:
    Apr 24, 2006
    Location:
    GA
    I have a Norinco 98 which I'm told is the same as a Hawk 982 and it will not accept a Blackhawk/Knoxx stock without modifing the receiver. The receiver nut that the stock bolt threads into is smaller with different thread pattern. You could replace the receiver nut with one from Remington 870 but it is larger diameter and therefore you must retap the receiver to accept it.
     
  4. MAX100

    MAX100

    Messages:
    249
    Likes Received:
    0
    Joined:
    Aug 16, 2007
    Location:
    SC- at the GUN-CONNECTION
    There are few with receiver studs that have a metric thread pattern; only a few. I also have a Hawk 98 manufactured 8 years ago and it has a standard receiver stud.

    You need to go the hardware store and get metric bolt that will work with the BlackHawk stock. Carry the receiver stud with you and the bolt from the BH stock.

    GC