[CatsMeow]

Well no, I just thought it was a gun to bang away with free ammo, that I did with it and that AR-looking .22 rifle. Didn't occur to me that it might have been a prototype.

Won't Ruger complain? Has the patent on the 10-22 already expired?

 

[edtf]

Well no, I just thought it was a gun to bang away with free ammo, that I did with it and that AR-looking .22 rifle. Didn't occur to me that it might have been a prototype.

Won't Ruger complain? Has the patent on the 10-22 already expired?

YUP the patent has recently expired so expect more copies of the 10/22 in the next few years. Just like the 1911

 

[Eye Cutter]

atty. ady. ang dami na ruger 10/22 clones! same league pala yan ng 1911 tsaka browning and glock!

ed, eto pa pampagulo sa utak ninyo!

Volquartsen Custom Trigger Assembly namin ni gundog! LoL!

 

[edtf]

atty. ady. ang dami na ruger 10/22 clones! same league pala yan ng 1911 tsaka browning and glock!

ed, eto pa pampagulo sa utak ninyo!

Volquartsen Custom Trigger Assembly namin ni gundog! LoL!

hahahaha teka muna nasa SS project mode pa ako!!! hahaha

 

[productionguy]

But for starters pwede na yan para lang mas ma BI si Jeff - hehehehehe
Jeff, Does it have the grove for a scope? My semi na tube didn't have the grove

yes bro,meron siya,may scope na siya ngayo,kaso 4x32 lang,i think kulang eto for br,i need to find cheapo scope na pwede

 

[edtf]

yes bro,meron siya,may scope na siya ngayo,kaso 4x32 lang,i think kulang eto for br,i need to find cheapo scope na pwede

WAIT! there would be a rule - scope magnification would be only till 4x ata. Check with Doc. I'm not sure if it is a rumor or will be implemented next year.

 

[Eye Cutter]

eto rules

http://www.wrabf.com/

 

[CatsMeow]

Beautiful. But baby steps first, this project of mine (revealed January), then I'll cast around for a 10-22.

atty. ady. ang dami na ruger 10/22 clones! same league pala yan ng 1911 tsaka browning and glock!

ed, eto pa pampagulo sa utak ninyo!

Volquartsen Custom Trigger Assembly namin ni gundog! LoL!

 

[JEZZZ]

yes bro,meron siya,may scope na siya ngayo,kaso 4x32 lang,i think kulang eto for br,i need to find cheapo scope na pwede

Baka pwede ito bro Nikon Buckmaster 6-18x40mm Mildot reticle.... pwede na seguro iyang scope na yan sa BR50 hehe. Let me know if you need a scope :supergrin:

 

[edtf]

Baka pwede ito bro Nikon Buckmaster 6-18x40mm Mildot reticle.... pwede na seguro iyang scope na yan sa BR50 hehe. Let me know if you need a scope :supergrin:

walang hiya ka bro Jezzz Junior BI ka na rin - Pabulong nga kung magkano yung scope na yan

 

[JEZZZ]

walang hiya ka bro Jezzz Junior BI ka na rin - Pabulong nga kung magkano yung scope na yan

Ayan na nakareserved na kay Sir Ed ang last unit ng Nikon Buckmaster 6-18x mildot.... pwede na ilaban iyang sibat mo sir Ed :rofl:

 

[Wp.22]

doc EC
From RFC
"The TG2000 is the same design as the factory trigger, and you'll find that people that know enough about them will say that particular design will not allow a trigger to SAFELY break at 1lb.

If you need a trigger that light, you should have just saved your money and bought a kidd"

 

[Eye Cutter]

now you tell me! LoL! problema walang mapabilihan ng kidd

 

[JEZZZ]

Ayan na nakareserved na kay Sir Ed ang last unit ng Nikon Buckmaster 6-18x mildot.... pwede na ilaban iyang sibat mo sir Ed :rofl:

Maraming salamat sir Edtf... Nikon Buckmaster 6-18x mildot SOLD.... ilaban na yan sir Ed. Have a merry Christmas.

We will have our first cyclone for the season tomorrow. Kaya Xmas namin ay naghahanda para sa cyclone hehe :supergrin:

 

[Sweater]

Yeah after I'm done with my present project, a nice cheap (less than P10k) semi-auto .22 will be next on my list, primarily a fun gun. I already have one in mind.



Cats Meow , Eyecutter was right , there are plenty of Aftermarket parts just like Glocks and 1911 for Ruger 10/22, even Troy industries came out with a Chasis for the Ruger 10/22.

Here , I bought a Ruger 10/22 Carbine for $250, before I even shot it , I made some Mods, right away.

(Black stock)
1. Green Mountain 20", Fluted, Bull ,Stainless barrel
2. Jard 1.5 lbs trigger assembly
3. Boyds Stock.
4. Tactical sol. Extended bolt release
5. Superior tac -Extended Mag release
6.Weigand Scope Mount
7.Talley Scope rings.
8. Bushnell Scope
9. Bipod- Harris )


-My 2nd Build(For My Daughter)
1. Boyds Evolution stock
2. Tactical Solutions 16"Fluted Bull Barrel
3.Kidd Bolt Assembly
4. Ruger Trigger with Power Custom internals
5. Ruger Lower
6. Talley Scope mt.
7. Nikon Prostaff Scope
8. Tactical Solutions Extended Bolt handle
9. Tactical Solutions Extended Mag Release
10. Ruger Double Mags
11. VQ Takedown Screws
12. VQ auto bolt Release

 

[Eye Cutter]

sweater, how is the jard trigger assembly?

yours is a virtual twin of pot's and my 10/22!

 

[JEZZZ]

Gaganda naman 10/22....

Meron ako extra 2pcs Boyd's SS evolution Stock (Jacaranda and Forest Camo Laminate) for your lovely 10/22s... baka type niyo. Send me an offer I cannot resist :supergrin: :rofl:

Sold. Mga adictus talaga taga BOGs hehe.

Abangan natin mga pics niyan hehe...

 

[kupstah]

For the CZ owners, baka meron kayo diyang trigger kit na extra na gustong ibenta. Ang haba talaga ng pull ng CZ 452 trigger.

 

[CatsMeow]

Aw, those are beautiful guns indeed, Sweater. I'll keep an eye out for a used 10-22 and build from there. For now, new and very expensive project (license already came out and hopefully will be in my hands this week). .22s are fun and best enjoyed outdoors, if you shoot indoors it just isn't the same.

On the other hand, perhaps an AR-based platform?

Yeah after I'm done with my present project, a nice cheap (less than P10k) semi-auto .22 will be next on my list, primarily a fun gun. I already have one in mind.



Cats Meow , Eyecutter was right , there are plenty of Aftermarket parts just like Glocks and 1911 for Ruger 10/22, even Troy industries came out with a Chasis for the Ruger 10/22.

Here , I bought a Ruger 10/22 Carbine for $250, before I even shot it , I made some Mods, right away.

1. Green Mountain 20", Fluted, Bull ,Stainless barrel
2. Jard 1.5 lbs trigger assembly
3. Boyds Stock.
4. Tactical sol. Extended bolt release
5. Superior tac -Extended Mag release
6.Weigand Scope Mount
7. Leopold 3x9x40 Scope
8. Bipod- Harris )

-My 2nd Build
1. Boyds Evolution stock
2. Tactical Solutions 16"Fluted Bull Barrel
3.Kidd Bolt Assembly
4. Ruger Trigger with Power Custom internals
5. Ruger Lower
6. Talley Scope mt.
7. Nikon Prostaff Scope
8. Tactical Solutions Extended Bolt handle
9. Tactical Solutions Extended Mag Release
10. Ruger Double Mags
11. VQ Takedown Screws
12. VQ auto bolt Release

 

[Wp.22]

For the CZ owners, baka meron kayo diyang trigger kit na extra na gustong ibenta. Ang haba talaga ng pull ng CZ 452 trigger.

Overtravel ba or matigas trigger?