close

Privacy guaranteed - Your email is not shared with anyone.

1911 problem

Discussion in '1911 Forums' started by KingRufus, Feb 13, 2010.

  1. KingRufus

    KingRufus

    Messages:
    77
    Likes Received:
    0
    Joined:
    Aug 16, 2005
    Location:
    coming to a location near you
    So I just got a CZ SP01 custom and shooting SA it breaks at around 2lbs.
    So my problem is my Springfield Mil-Spec is my favorite pistol I own(but that darn CZ is catching up quick-due to such a smooth trigger pull), question is there a drop-in kit that can cure my ailments. I would like to keep from spending too much also, Please tell me that there is something I can do to solve this. Also neither are carried so no worries there.

    Thanks for any help,
     
  2. Brass Nazi

    Brass Nazi NO BRASS FOR U!

    Messages:
    1,956
    Likes Received:
    0
    Joined:
    Jul 4, 2005
    Any competent gunsmith should be able to do a nice trigger job on a 1911.
     

  3. RH45

    RH45

    Messages:
    527
    Likes Received:
    0
    Joined:
    May 14, 2003
    Location:
    Fond du Lac, WI
    There are some kits that should get you down around 2# that are SUPOSED to be drop-in kits, but, sometimes do require some fitting because, believe it, or not, all pistol frames are not perfectly square, or have the holes exactly the same.

    One kit that comes to mind is the Extreme Engineering.
     
  4. Don-wayne

    Don-wayne

    Messages:
    198
    Likes Received:
    0
    Joined:
    Jun 15, 2008
    Brazo's kit is the best I've found. You will need to fit your thumb safety to the sear.
     
  5. Rinspeed

    Rinspeed JAFO

    Messages:
    11,263
    Likes Received:
    1,848
    Joined:
    Feb 28, 2001
    Location:
    NY


    I've heard the kits by EE are as good as they get and are in fact the same as the Cylinder and Slide kits.
     
  6. tlen

    tlen

    Messages:
    371
    Likes Received:
    0
    Joined:
    Feb 11, 2009
    Location:
    Kansas
    Last edited: Feb 14, 2010
  7. PlasticGuy

    PlasticGuy

    Messages:
    5,165
    Likes Received:
    0
    Joined:
    Jul 10, 2000
    There are good drop in kits that will cut down the trigger pull of your Springfield. That said, nothing drop in will give you a 2# pull. A lot of good gunsmiths can make that happen, but a drop in kit that is truly safe is limited to about 3.5 or 4 pounds.