Glock Talk banner

165 grain 9mm with CFE pistol?

3780 Views 24 Replies 8 Participants Last post by  picker.
Well I picked up 1k of 165 grain (yes, 165) and am trying to figure out a good starting load. I want to use CFE pistol powder, but I can't find any guys loading anything over 147 grain bullets. I normally load 147 grain with 4.3 grains of CFE.

I was thinking of starting at around 2.8 grains and then working up. Or should I start a little higher?
1 - 1 of 25 Posts
Chrono;s are cheap, don't ask me how i know.

PS You have the wrong hobby to cut costs on, the more data you have the more fingers you wind up with [smile]
1 - 1 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.