GlockTalk Forum banner

red dot

  1. General Glocking
    Hello all. I will admit I'm cheap and always try to find parts of high quality for a low price. I want to look for a RMR for my Glock 19 and when i went to my local gun store i came across the Riton X3 Tactix PRD for $194.95. After holding the item i noticed the quality and it was definitely...
  2. General Glocking
    Does anyone know of a Reputable company to do an slide cut to a Glock 43 to fit a Holosun 507K red dot optic ?
  3. Sights, Optics and Lasers/Lights
    I recently got a MCK for my 20SF. For those of you who have a MCK what red dot sight are you using or recommend?
  4. Wanted To Buy
    Looking for a Trijicon RM09 either Type 1 or Type 2. Black preferred. Let me know what you have! Chris
  5. Sights, Optics and Lasers/Lights
    I couldn't find a rds for my 43x and saw a romeo zero in my LGS and decided to give it a try while I wait on the 507k. Does anyone know what sights would co-witness better? The guy who milled the slide said I need .05"-.06" taller sights to get that nice lower 1/3 co-witness. I have the truglo...
  6. Gun Parts & Accessories
    Brand new in box Trijicon RM06 3.25 moa. Purchased two originally, only going to use one. My loss, your gain. No trades. $ 408 shipped PayPal friends and family
  7. Gun Parts & Accessories
    SOLD SOLD SOLD NOTE: I do recommend this model...the 6MOA-8 MOA ring rocks for CCW even if I do wish it were a 4MOA-6MOA ring. They can be found online at botach for $189.99 and sometimes a discount code will take more off. LIKE NEW -- HOLOSUN 407CO red dot This is the version with a ring...
  8. Firearms Listings
    Quarter Circle 10 9mm AR / Pistol Caliber Carbine Excelent condition, approximately 150 rounds fired Uses all Glock 9mm double stack magazines ( 2 included) Shoots great! - Quarter Circle Ten Lower, Bolt and 7.5in. 9 mm barrel 1/2-28 Threading - Aero Percision upper keymod forend with QR...
  9. Sights, Optics and Lasers/Lights
    Hey guys, i recently picked up a holosun hm3x magnifier to pair with my 515cu red dot. When shooting 100yds at steel with just the red dot i get about 1.5-2" groups with my 7.62x39 ar15. Adding the magnifier seemed to open up my groups significantly (3-4" @ 100yds) and made me reconsider using...
  10. Gun Parts & Accessories
    This is a brand new, unfired SHIELD RMS 8MOA red dot (that is 4" at 50 yards, 2" at 25 yards, and 1" at 12.5 yards--the larger dot doesn't appear to shake as much as smaller dots). This will fit the GLOCK MOS, the new SIG 365XL, as well as any gun milled for a Shield RMS sight. The red-dot...
  11. General Glocking
    LOoking to narrow down on a red dot for the new Glock 48. Looking for a red dot thata some what compact but don’t want to spend more than what the guns worth. I like the rmsc but don’t want to break the bank on that optic. I have used plenty of vortex vipers and was seeing anyone’s input on...
  12. Gun Parts & Accessories
    Withdrawn
  13. General Glocking
    Does anyone know who makes a holster for a G19 that has a red dot sight on it? I have asked a few makers if they do and have struck out. Looking for a IWB if possible. I have a Vortex Venom on it and it runs really great. Impressed by it, especially at ranges over 25yds. Thanks for any help!
  14. Misc. Gun Stuff
    WTS WTT Red Dot Powder 8lb Jugs NE/Central FL FTF New never opened, stored in climate controlled room at all times purchased circa late 2012/ early 2013 Current prices online I have seen without hazmat are $153 / 8lb jug would sell for ONLY $138 FTF within 50 miles of Jax FL. Add $10 for each...
  15. General Glocking
    Hey Guys, I have a glock 19. I am about to send my slide off and get it milled for a red dot. I am not sure if I want the vortex viper or the venom however with the venom they are telling me the rear sight has to be in front of the red dot. So what do you think or what do you prefer? The viper...
  16. Gun Parts & Accessories
    SOLD Used (300 rounds) Suarez SI-43 stainless slide with a melonite finish for the Glock 43. Cut for the Burris Fastfire III and Vortex Venom red dot sights. The slide did require a short break-in period but ran 100% in a recent speed steel match. The internal parts are original Glock. Ready...
  17. Sights, Optics and Lasers/Lights
    At our shop we can machine and install a red dot on a Glock for around $125. (Cost of sight extra) If you've looked into buying a red dot sight, you need to consider that milling set up and cost, it's precision work. What are other shops charging for this? Some folks think we're $high but...
  18. Misc. Gun Stuff
    Have a new, never mounted FDE RMR rm01 for $450 shipped. Cant find box or accessories. Email me hartsockr1(at)yahoo(dot)com for pics or questions. Cross posted.
  19. Gun Parts & Accessories
    NIB. Only opened for pictures. $700 shipped. Cross posted and posted locally. https://www.midwayusa.com/product/971768/aimpoint-compm4-official-us-army-m68cco-red-dot-sight-30mm-tube-1x-2-moa-dot-with-picatinny-style-mount-matte Contact at [email protected] Ships from Austin via USPS with...
  20. General Firearms Forum
    I hate two Glock MOS pistols : 19 and 34. One has the Trijicon RMR and the other the Vortex Venom. Both are zeroed for me at 25 yards. However, I just plugged in the data through one of my ballistic apps, iSnipe. I found that at a 10 yard zero, the point of impact is +2.5 inches at 50 yards...
Top