Glock Forum - GlockTalk banner
malfunction
1-12 of 12 Results
  1. General Firearms Forum
    Hey guy’s I’m in the process of sorting out some of the bugs of my first polymer 80 build PF940V2 9mm. So I have about 500 rounds through the gun, no trigger issues and the gun is pretty dead accurate. The issue that I am having is the first 3 mags will give me stovepipes FTE, after that the...
  2. California Glockers
    New to the forum and guns in general, hoping someone more knowledgeable may be able to help pinpoint my problem and possibly offer a solution. I bought my first gun earlier this year, a G17 gen 3. First few times to the range were great, no issues with malfunctions. I purchased a slide from...
  3. General Firearms Forum
    Hey, got my first gun and it seems either I messed something up already or...? Whenever I open up the slide and tilt the gun down, I can see a metal pin protruding??!?!?! I tried googling it, but can't seem to find my specific issue. Maybe I'm just blind, but this is a serious problem. What...
  4. General Glocking
    I have a Gen 4 Glock 19 that has an Olight mini 2 on the front. It was not going into battery fully when chambering a round unless letting the slide "slam." Upon flipping the "flap" to detach and release pressure on the rail, the slide immediately goes fully into battery. I loosened the light...
  5. Gunsmithing
    (This turned into a lengthy post, so I have highlighted the most important points in red) Hello all. I'm having quite the headache and I hope some here will be able to help troubleshoot. First, a bit of history on the gun in question: it's a Poly80 PF940C with a stock lower parts kit and a...
  6. General Glocking
    Hello all, I bought my first glock yesterday, a glock 48 to be exact. I took it out of the box, oiled it, and went to the range today. On nearly every round the slide was sluggish to go into battery,and I had two light primer strikes on federal hydrashok ammo. Has anyone else had problems with...
  7. General Glocking
    I recently acquired a new-to-me G48 with the black slide. The one opportunity I had to shoot it, I had 2 instances (out of 200 rounds) of it failing to go fully into battery. I was shooting factory ball ammo. Attempting to diagnose the problem at home, I've discovered that when the trigger is...
  8. Gunsmithing
    Attached file of light primer strikes. I have a G-26 purchased new, which has about 8,000 rounds through it. I had 6 out of 100 light strikes, pictured. As this gun is 19 years old, I would would like to replace any parts which need an upgrade. What would be most cost effective? 1) send...
  9. GATE NFA/Class III
    Recently at a machine gun shoot, there were numerous failure to extract/double feeds through multiple factory, PMAGS, and BETA 100 round glock drum when shooting full auto. Fired casing wouldn't extract from barrel followed by another live round trying to feed after about 10 round full auto...
  10. General Glocking
    I made a glock 19 from an 80% polymer kit and the slide seem to not fully go to the rear of the rails causing the spent brass to not stovepipe but jam horizontally. is this an issue with the recoil spring or ejector?
  11. General Glocking
    Have a Glock 17 Gen 3 that's about 1500 rounds old and noticed its starting to slam fire (slide locked back, new mag inserted, release and boom without trigger pull). I found that sometimes when I pull the slide back and let it fly, the trigger pin sear misses (fails to engage) the trigger...
  12. Introduction Forum
    Came across your forum after doing some searching about what to do for a squib load scenario. Had a round stuck in the barrel for my Gen 3 G23 a few days ago. Was introducing a new shooter to the craft and noticed something odd (pffft, no ejected spent casing, smoke coming out of the slide...
1-12 of 12 Results
Top