Glock Forum - GlockTalk banner
ftf
1-13 of 13 Results
  1. General Firearms Forum
    Good afternoon all, Brand new to the forum and having issues with my Gen 3 Glock 22. I recently purchased a Rockslide USA aftermarket slide for my gun. The gun will now not feed rounds at all. I have changed nothing other than the slide and after taking apart and putting back together multiple...
  2. Misc. Gun Stuff
    Five (5), 50-rounds boxes of 5.7x28 American Eagle FMJ Prefer FTF in the San Antonio, TX area $200.00 (.80/round)
  3. Introduction Forum
    Hello all, First time pistol owner. Just got my first pistol 6/6/21. Shadow Systems MR920 Elite. Joined to ask a question. Asked about FTF and mag fall out when firing. I think I have a serious addiction on my hands.....been to range 8 times, 5 days straight. Trying to add up ammo purchases and...
  4. General Glocking
    Hello fellow Glock friends, New to the forum, not new to Glocks. Currently I own two gen 4 models and I love them, never had a single issue and I shoot them really well. Recently I decided I want to get a gen 5 G19, but did a little research and based on my limited research it seems like IF...
  5. General Glocking
    Recently got an Olight PL-2 Valkyrie 1200 lumens for my gen-4 G20 setup for the outdoors. This G20 never had a FTF or any other issues the way it is setup (stormLake barrel + 17-lb stainless steel recoil assembly), neither with regular loads nor with hot loads. Although it has shot a lot less...
  6. Reloading
    So I loaded up some rounds for my G30SF .45 with Berry’s plated 200gr RNFP on top of 4.6gr of Bullseye for the range. Out of 50 rounds 2 FTF due to the gun not going into full battery. It actually took a bit of slide work to free these rounds. All rounds were measured out to 1.215” OAL to...
  7. Gunsmithing
    No problems/complaints with my Glock 27 Gen3 bought new Aug 2010 ... until last winter, so replaced (some upgraded) ALL springs, full deep clean with micro use of top lubes, et al. only to return to same problems. All new mags replaced old last winter as first solution! Can't be limp wristing...
  8. General Firearms Forum
    This problem has been getting noticeably worse over the past 100 rounds I've put through my usp45. With standard pressure 230gr ammo (fiocchi, federal, armscore, brown bear), all of them have 1-2 failures to feed per mag. Each FTF is the exact same too. The round goes in the barrel halfway and...
  9. General Glocking
    Lots of issues with the G42 and jams. (stovepipes) Tried 5 type of ammo in it, still unreliable. Does the G43 do the same? I know they talk about breaking the G42 in 500 rounds and the rest of the BS. But I don't want my life to be hanging on a break in or the wrong shooting posture. My G17...
  10. Black Rifle Forum
    Had my first FTF today. While running some steel cased TulAmmo thru a new build, one round was a FTF. Upon further examination, the unfired round felt lighter than normal, like there was no powder inside the case. Otherwise it looked like any other steel cased round. The bullet appears to be...
  11. Caliber Corner
    Hello fellow glockers. I am seeking advice regarding an issue with my g42 and its inability to chamber HP rounds. The issue causes the nose of the round to jam into the feed ramp and the slide to lock back. It happens with every round in the magazine (i.e. Not just the first round from a...
  12. General Glocking
    I get one in about every 40 rounds. I consider this unacceptable! I'm using a gen 4 Glock-29. I have returned the gun to stock parts and still have the problem. Maybe I'm limp wresting it? I don't know. Is anyone else having this problem? I don't want my weapon to fail me, my life might...
  13. General Glocking
    Hi, I am new to this forum (sorry if in wrong section) and am posting this on behalf of my dad who is a Missouri State Highway Patrolmen. Last week he got a back up pistol for him to use at work which was the Glock 42 blue label. Once we took it to the range it started having many problems...
1-13 of 13 Results
Top