Glock Forum - GlockTalk banner
failure to feed
1-14 of 14 Results
  1. General Firearms Forum
    Good afternoon all, Brand new to the forum and having issues with my Gen 3 Glock 22. I recently purchased a Rockslide USA aftermarket slide for my gun. The gun will now not feed rounds at all. I have changed nothing other than the slide and after taking apart and putting back together multiple...
  2. General Firearms Forum
    First off, apologies for my ignorance as this is my first pistol. I have a Shadow Systems MR920 Elite. I am experiencing failure to feed issues with both magpul ( junk I assume ) and factory glock 19 15 rd mags. I have put more than 500 rounds through the weapon. Likewise I am experiencing...
  3. General Firearms Forum
    Hey guys, I got a p80 g17 recently and it slides smooth as butter but when I chamber a round, the striker doesn't recede fast enough causing it to catch on the top of the rim and cause failure to feed. Any ideas on what it could be causing this to happen? Keep in mind it has no problem feeding...
  4. California Glockers
    New to the forum and guns in general, hoping someone more knowledgeable may be able to help pinpoint my problem and possibly offer a solution. I bought my first gun earlier this year, a G17 gen 3. First few times to the range were great, no issues with malfunctions. I purchased a slide from...
  5. Gunsmithing
    First post here. I'm completing my first p80 build and when I cycle dummy rounds through the gun, every round pulled from the magazine gets hung up on the firing pin! I'm including a photo for reference. The firing pin will reset, but only at the very last moment before chambering a round. I'm...
  6. General Firearms Forum
    Hello, I built a Polymer80 Glock 26 with all Glock OEM parts including Glock magazines. I have medium/large hands so my pinky finger, sometimes two fingers will go below the magazine and apparently are pushing up. This causes every type of failure because the magazine gets in the way of the...
  7. General Glocking
    Hi there, I purchased a brand new Gen.5 Glock 17 MOS in February of this year (2020) along with additional Glock brand mags. The past two times I've shot the spent casing will eject no problem, but the slide locks back every shot. It will chamber a new round no problem—I just have to rack the...
  8. General Glocking
    Hello fellow Glock friends, New to the forum, not new to Glocks. Currently I own two gen 4 models and I love them, never had a single issue and I shoot them really well. Recently I decided I want to get a gen 5 G19, but did a little research and based on my limited research it seems like IF...
  9. General Glocking
    Recently got an Olight PL-2 Valkyrie 1200 lumens for my gen-4 G20 setup for the outdoors. This G20 never had a FTF or any other issues the way it is setup (stormLake barrel + 17-lb stainless steel recoil assembly), neither with regular loads nor with hot loads. Although it has shot a lot less...
  10. GATE NFA/Class III
    Recently at a machine gun shoot, there were numerous failure to extract/double feeds through multiple factory, PMAGS, and BETA 100 round glock drum when shooting full auto. Fired casing wouldn't extract from barrel followed by another live round trying to feed after about 10 round full auto...
  11. General Glocking
    I recently bought a Gen 4 Gock 26 and before I bought it I took it apart and cleaned it. I took it out to the range and the gun had a couple of failure to feeds. Granted I was using cheap blazer and Aquila ammo. Is this something I should worry about or do I just need to break the gun in? I have...
  12. Gunsmithing
    I purchased a G21 Gen 4 last September. I took it to the range and ran about 2000 rounds of ball without a hiccup. Every January, I cycle all my duty ammo and get new stuff (I have several other guns that have duty ammo). My G21 ran steel, aluminum and brass ammo but I got failure to feed...
  13. General Glocking
    I get one in about every 40 rounds. I consider this unacceptable! I'm using a gen 4 Glock-29. I have returned the gun to stock parts and still have the problem. Maybe I'm limp wresting it? I don't know. Is anyone else having this problem? I don't want my weapon to fail me, my life might...
  14. General Glocking
    Hi, I am new to this forum (sorry if in wrong section) and am posting this on behalf of my dad who is a Missouri State Highway Patrolmen. Last week he got a back up pistol for him to use at work which was the Glock 42 blue label. Once we took it to the range it started having many problems...
1-14 of 14 Results
Top