Sold Used Double Diamond s/s Gen 4 Glock 27 9mm threaded conversion barrel with factory Glock 10 round 9mm magazine. Estimated round count of about 300. Thread protector included. $125.00 shipped. https://www.glockstore.com/Double-Diamond-9mm-Conversion-Barrels-for-Glock Part#...

I found an article online that talked about a .30 parabelum (7.65x21) semi drop-in barrel for the G43 that would function with no other modifications. I like the idea of a lighter round for a pistol as small as the G43, but I'm betting that .30 parabelum is a PITA to find on the local sporting...

Wait--before you ask why, here's why: I have almost 4000 rounds of 357sig lying around (a cheap, sunk cost from long ago), so we are talking about a LOT of rounds I can put to use. Barsto makes the semi-fit barrel which, while not cheap, is a lot cheaper than buying a 357sig gun. OK, here's my...

Hi, Does anyone have info on when Gen 5 conversion barrels will hit the market? It seems like the Gen 5 Glocks have been out for a while now and you would think someone is making conversion barrels already but there's none. I've reached out to KKM with no response and just reached out to Lone...

Just want to mention that the brass to face issue on a Glock 27 G27 Gen 2.5 with a Glock 23 G23 40-9 conversion barrel was resolved with the following parts ordered and installed... (1) glsp28927 SP28927 Glock Trigger Housing (Gen 4) 40 S&W $9.95 (only use the 28926 ejector) (1) Glock OEM...

Am I correct that if I get a 33 barrel, extractor and mags I can convert a Glock 26 to a 33?

SOLD For sale: Advantage Arms 22LR conversion kit with 5 mags for Glock 17/22/31/37 Gen 1-3 only: $249 The kits comes with everything it did when purchased new, plus the 4 extra mags. That's like buying the kit and getting about $75 worth of mags for free. I cut out the foam in the upper...

I have a G21 and am converting to a 10mm for my walks in the woods (bears are around and like getting in the bed of my pickup) so I've been reading about it and saw where if you use hot loads from Underwood or Buffalo Bore you should use a 20lb spring for your guide rod. I looked for guide rods...

I just finished my Glock 23 conversion. I know there is a lot of questions about these conversions so I figured I would share mine and hopefully answer some questions. I bought a stock Glock 23 for a really good deal. I have no use for a 40 cal because I do not own any. So I decided to convert...

PLEASE DELETE POST !!!

I am going to covert my G23 to 9mm and am trying to find the correct magazine follower for my G23 mags. Is there a conversion or just use 9mm followers?

I'm getting a .357 Sig conversion barrel for my Glock 23 to gain some flexibility. I like the idea of being able to shoot both calibers with one firearm. My question is for anyone who has actually done this with their Glock 23: Are there reliability considerations? It is my understanding...

Hey there, I have a conversion kit meant for 22 lr, that is from Advantage Arms, however it says L.S. 26/27 on it. I checked with your website and others, and the only slides I found were L.E. 26/27. Is it like some sort of special edition, or a partnership with Lightning Strike (hence the L.S.)...

I'd like to convert my G19.4 to a G32.4 but not sure about the components. 1. Complete G32.4 upper. 2. Replace ejector but.... do I need to change the locking block?? any other component?? :confused:

Hey all, long time reader, first time poster (and register...er) I have a Gen3 Glock 37 and (yes, I did use the search function) wanted to clarify exactly what is needed to swap a Glock 37 to a 17. I understand the extractor is obviously different on the 17 over the 37, but to frame this...

I have always been a fan of 10mm, and don't like .45 unless it's in a 1911 platform. But basically, I have a Glock 21 I never shoot so I am wanting to convert it to 10mm. I have a spare Glock 20 bare slide laying around and barrel. So I am curious if I take out all the internals from the 21...

I just purchased my first Glock. A 19. I'm a lefty and honestly this is my first pistol that gives me the ability to conform to a lefty's comfort. So, I get on YouTube to get a quick instruction on converting the magazine release to the right side. Very easy...until I tried to do it. My sticking...

Any recommendation for a Carbine Conversion kit that doesn't break the bank? I am partial to .357 Sig but a 45 ACP or .9mm could do.

I am new to shooting. I bought a Glock 40 gen4 with a burris red dot and just love it for amazing accuracy. But, it is a loaded cannon for a new shooter with the minimum charge of longshot 8.5 behind a 180 gr bullet (212,000 power factor). Lots of power and of course muzzle flip. So I loaded...

I have a Glock 30 Fire Dragon barrel ported for $40.00 shipped, and one 45 acp magazine for Glock21...$15.00 shipped. All other stuff is sold