close

Privacy guaranteed - Your email is not shared with anyone.

what norinco 45 to get?

Discussion in 'Band of Glockers' started by kcboy, Apr 27, 2006.

  1. kcboy

    kcboy CHEEPUCK.COM

    466
    0
    Jan 4, 2003
    manila,philippines
    sirs,
    solicit lang ako ng advice from the BOGs out there,
    what model should i get?
    the norinco police, np30, other models or should i wait for the np44? advantages and disadvantages of the models? mag compatibility and other issues...any response will be highly appreciated....:)
     
  2. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye
    I'll go for the Government Model 1911-A1.

    I'll gut out everything and replace all factory originals with premium aftermarket parts and end up with just the norinco frame.
     

  3. kcboy

    kcboy CHEEPUCK.COM

    466
    0
    Jan 4, 2003
    manila,philippines
    sir,
    if i do that won't you spend a lot more in the long run???
     
  4. isuzu

    isuzu

    4,072
    0
    Jul 3, 2005
    North America
    I think the barrel is quite accurate, too. And it's chromelined.
     
  5. :agree:

    It's a good gun and you could do the changeover of the internals in stages if you're working on a budget.

    I'd start with good sights, a beavertail and a trigger job and leave the other parts stock meantime.
     
  6. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye

    of course! you'll probably spend 2-3x on aftermarket parts than the original cost of the unit, but that is the beauty of the 1911 format...

    besides, how much is a brand new Colt 1911 now? 50-55k? you'll still spend less with the norinco and get your very own customized pistol!
     
  7. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye
    Batangueno ordered the norinco commander model from Deenoh.

    Knowing Paul, matitira lang dun yung frame! Papalitan niya lahat ng parts! Nakabili na nga siya ng Novak rear sights sa PB Dionisio. Naka sale kasi!
     
  8. kcboy

    kcboy CHEEPUCK.COM

    466
    0
    Jan 4, 2003
    manila,philippines
    dealer po ba si deenoh ng norinco? i always inquire abt norinco and taurus and glocks sa trust n trade....
     
  9. mtho

    mtho

    2,853
    0
    Nov 18, 2005
    Brand new colt at PBD is 70th
     
  10. Alexii

    Alexii Janeway Forever

    1,069
    0
    Nov 14, 2001
    Delta Quadrant
    What if one goes the 'all-stock-parts' route with the Norinco 1911A1 (well, not including its grips and puny sights) and have all the innards polished and smoothened-- would this be a viable alternative?
     
  11. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye
    alexii: yes, that is a viable option keeping it all stock!

    But i recommend changing the hammer, sear, and disconnector. Extreme Engineering makes an excellent trigger group!

    Next will be to replace the grips, add a beavertail and change the sights to bomar, heinie's or novak's.

    magazines: wilson, chip mcormick, mecgar, kobra mags if available dito

    edited to add: i'll also replace all the springs with ISMI
     
  12. st. matthew

    st. matthew c_w@_u_need_2_c

    1,440
    0
    Jul 8, 2005
    guys, magkakano ang 1911 A-1 government model na norinco ngayon?
    puede bang gawin .40 caliber siya?
     
  13. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye
    70k na ang Colt?!? hooowaaaww!

    magkano norinco govt model? 18-20k inclusive of license from deenoh?

    upgrades and aftermarket parts: all prices are from shooters connection website

    beavertail: STI $30
    Hammer, sear, disconnector: Extreme Engineering group $130
    trigger: STI $30
    rear sights: Novak $30
    front sights: Dawson fiberoptic $30
    Grips: STI $55
    Magazines: CMC Powermags $20 ea
    Full length guide rod: STI $20
    Match barrel bushing: $20
    ISMI springs: recoil spring, hammer spring

    gunsmithing:
    checkering front strap
    lower ejection port
    dovetail slide to install front and rear sights
    polish all parts (inside slide and barrel hoods
    other cosmetic enhancements like flatten slide top, front serrations, etc.
    reblueing
    ano pa???

    hindi aabot yung total to 70k!
     
  14. batangueno

    batangueno Shock Resist

    4,804
    0
    Oct 1, 2002
    California
    Hahaha, hindi naman. :supergrin:

    Doc, ikaw wala ka pang commander di ba? :supergrin:
     
  15. isuzu

    isuzu

    4,072
    0
    Jul 3, 2005
    North America
    I guess the slide as well as extractor, firing pin and ejector is different for a .45 ACP as opposed to .40, .38 Super and 9mm.
     
  16. Eye Cutter

    Eye Cutter Moderator

    8,193
    1
    Nov 21, 2002
    Dr. B. Eye
    happy na ako dun sa Ranger-STI Trojan clone ko!
     
  17. isuzu

    isuzu

    4,072
    0
    Jul 3, 2005
    North America
    For a Norinco 1911, I'd get a full size and commander from Deenoh. I'm sure you'll order a commander after you have ordered a full size 1911 or vice versa.:)
     
  18. Hi Kc, all of BOGs are consistent in their advice to get the Norinco full size 1911 single stack first.After breaking in and experiencing firsthand the pistol's performance then you decide which parts you want replaced.

    As Isuzu said, get the full size from Deenoh to be followed later by the Commander model then if I may add, the widebody model NP44 (not the 10 rounder NP30).Probably I'll take that route also.

    You can also get as starter the Factory Enchanced or Police model. The finish and fit is much better compared to the milspec. No need to replace the barrel (chromed lined), extractor (spring steel), beavertail (cosmetic lang), slide stop (not MIM) and maybe the Novak style sights.The rest, as Eye Cutter pointed out, you can replace with quality parts (then sell me cheap the replaced parts :supergrin: ).Finally, you can have your unit Hard Chromed for added beauty and corrosion resistance. That's it Kc, hindi pa aabot ng 70T yan. Use the money you'll save to get quality gears, lots of ammo and ample range time.;)
     
  19. bertud ng putik

    bertud ng putik

    381
    0
    Feb 1, 2005
    cavite
    kung gusto mong ala nardong putik get the standard 1911A1 model norinco. hehehe! kung gusto mo na pormado na, get the factory enhanced special or the police model.

    tapos, magsawa ka muna sa kakaputok. tsaka mo na lang bihisan at pa chrome pag nalaspag mo na ng todo.
     
  20. kcboy

    kcboy CHEEPUCK.COM

    466
    0
    Jan 4, 2003
    manila,philippines
    thanks mga BOGs sa reply. highly appreciated.;)