close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

Uspsa holster help !!!

Discussion in 'General Competition' started by bigtimelarry, Aug 16, 2012.

  1. bigtimelarry

    bigtimelarry

    438
    2
    Apr 22, 2012
    Is this Holster legal for USPSA Production. I know it has to cover 1/2" of the ejection port but is that from the side or front ?
    Thanks in advance for any help.. View attachment 227128
     
  2. davsco

    davsco

    507
    0
    Feb 27, 2011
    May not be manufactured or cut lower than,
    and must cover the slide up to, ½” below the
    ejection port (belt slide “Yaqui” type holster​
    exempt).

    ==> yours looks fine
     


  3. Njanear

    Njanear Nagant-ophile

    1,517
    0
    Jul 20, 2004
    Atlanta, GA
    Check to make sure that the offset doesn't put the pistol more than 2" out from the inner side of the belt (and if you are using a double belt like a CR Speed, from the inside edge of the INNER belt). I tried a BladeTech DOH on a Double Alpha and the gun sat too far out based on that rule, so I had to pull off the DOH attachment.
     
  4. bigtimelarry

    bigtimelarry

    438
    2
    Apr 22, 2012
    Great, I'll make sure.. Thanks for the quick reply's guys. I appreciate it..
     
  5. Hoser

    Hoser Ninja

    2,354
    38
    May 22, 2002
    That looks like a Blade Tech DOH.

    Pretty common holster in USPSA Production.
     
  6. Njanear

    Njanear Nagant-ophile

    1,517
    0
    Jul 20, 2004
    Atlanta, GA
    Mine was a B/T DOH too, but didn't meet the 2 inch rule as I see it demonstrated in the USPSA rules. Looking at this pic, if his slide is 1.18in. wide, it appears that there will be over 2 inches from the inside of the belt at the top of the holster to the side of the gun when measuring from the top of the belt. of course, pics on the internet can really be deceiving. :supergrin:

    BTL: to really find out, put your holster and gun on your belt and then measure it using Appendix E2 of the USPSA rule book. It has photos to show you how to measure.