Trijicon GL11 night sight installation help

Discussion in 'Sights, Optics and Lasers' started by Irelander, Jul 1, 2012.


  1. Irelander

    Irelander Glocker

    472
    0
    386
    I am in the middle of installing a set of Trijicon GL11 Novak sights on a Gen3 22 and a Gen4 23. I am having a bugger of a time getting the rear sights on. I have a MGW Glock sight pusher but the slanted sides of the Novak sight kept making the sight slide out of alignment. I clamped the slide in a padded vice and gave the sight a few good raps with a hammer using a wooden dowel. The sight moved a little but now won't budge. Anyone have experience putting these sights on? I have put tons of Glock night sights on Glocks but this is the first set of Novak type sights I've worked with. Any suggestions?
     
  2. Irelander

    Irelander Glocker

    472
    0
    386
    Well I have been doing a little research and found that others have found that the MGW Glock Sight pusher will not work for Novak style sights. Seems that the best way to get these sights in is to use a brass punch. I'm going to give it another try using a brass punch and see if I can get them in.
     


Share This Page