close

Privacy guaranteed - Your email is not shared with anyone.

triggers

Discussion in 'Gunsmithing' started by rimfire22, Oct 26, 2011.


  1. rimfire22

    rimfire22
    Expand Collapse

    Joined:
    Sep 15, 2002
    83
    0
    Location:
    michigan
    My G19 had a NY1 trigger spring which I am replacing as soon as the spring I ordered arrives. My dumb question is could I take the hole trigger out of say my G21 Or G17 and put it into my G19 so I could shoot it tomorrow. I know I could take just the spring.
     
  2. Njanear

    Njanear
    Expand Collapse
    Nagant-ophile

    Joined:
    Jul 20, 2004
    1,517
    0
    Location:
    Atlanta, GA
    Are the G17 and the G19 either both non-GEN4 or both GEN4? If so, you could easily swap the whole trigger bar/trigger housing assembly into your G19. If one is a GEN4 and the other isn't, that won't work (but as you said, you could do the simple spring swap).

    The G21 assembly will not work, but you could borrow the spring from it.
     

  3. rimfire22

    rimfire22
    Expand Collapse

    Joined:
    Sep 15, 2002
    83
    0
    Location:
    michigan