Privacy guaranteed - Your email is not shared with anyone.
Separate names with a comma.
If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.
Discussion in 'Reloading' started by glascowangus, Apr 4, 2011.
Whats your go-to powder for good to great velocity with minimal flash under a 200gr projectile?
I really like AA7 for my general plinking loads.
New guy here. Sorry for any redundency- i just found the "10mm reloading" forum and probably should have posted over there. Any and all info is still appreciated.
AA-7 works great along with Vihtavuori N-350.
Just be sure it's safe. I have seen a bunch of loads I would never consider using.
My projectile of choice for that application is a DT 200gr WFNGC. For the stock barrel I like the velocities Longshot produces at relatively low pressures. I got 1250fps out of my 6" LWD barrel @ 8.4gr (0.1gr under max) using CCI350's @ 1.250 OAL. The 200gr WFNGC doesn't like to be loaded @ 1.26 in my barrels. On a side note, DT's loaded 200gr WFNGC advertises 1300fps out of a 4.6" barrel, but only chrono'd @ 1215fps out of my 6" barrel. Although 1215fps isn't something to cry about, my under-max Longshot loads beat their load's velocity. As for my 1350-1416fps 800X loads, they will never see the inside of a stock barrel...
As always, start low, and work up slowly.