close

Privacy guaranteed - Your email is not shared with anyone.

spray on gun finishes for glock frames (brownells stuff and durakote)

Discussion in 'General Glocking' started by kenndapp, Nov 12, 2012.


  1. kenndapp

    kenndapp
    Expand Collapse

    Joined:
    May 20, 2012
    317
    0
    been thinking about some DIY glock frame painting/finishing
    looking specifically at....

    -shake and spray durakote kit (mix up a few parts into some aerosol canister...basically fancy rattle can)

    -allumahyde II (rattle can from brownells)

    -kg gun kote (rattle can from brownells)

    i have checked out all the forum reviews and you tube videos i could find on all thees products. problem is they are usually reviewed on metal receivers barrels and other metal parts. and thees spay one air dry type finishes....basically spray paint for guns. people seem to say they are not too great on metal but im betting they are pretty good for plastic. my only requirements are durability with kydex holster use. don't need a to send frame away for professional cerakote. but i would like better results than a can of krylone. any one any use any of thees 3 spay finishes on their plastics?
     

    Wanna kill these ads? We can help!
  2. Rick305

    Rick305
    Expand Collapse
    ra1sales.com

    Joined:
    May 14, 2012
    472
    1
    My XDs is GK GunKoted in red/black camo (James at XD-hs2000.com did this wonderful job.)

    Afaik , all of the coatings you listed are not "spray and bam" , GK has to go in an oven I believe ...

    [​IMG]
     

  3. plouffedaddy

    plouffedaddy
    Expand Collapse

    Joined:
    Apr 1, 2011
    2,239
    1
    Location:
    Carolina
    I've never used Gunkote but have used the others---they are equally durable.
     
  4. kenndapp

    kenndapp
    Expand Collapse

    Joined:
    May 20, 2012
    317
    0
    I know some of theese shoulder be baked on. How much heat can a glock frame safley take though? Also I heard a lot of complaints about the Matt finishes being too glossy? Is there one that is more true to a Matt finish than the others?
     
  5. 33rdglock17

    33rdglock17
    Expand Collapse
    Boosh

    Joined:
    Feb 6, 2011
    135
    0
    Location:
    anti gun, IL
    Do you think that durakote kit has enough product to completely cover a stippled full sized frame (not the slide).
     
  6. Rick305

    Rick305
    Expand Collapse
    ra1sales.com

    Joined:
    May 14, 2012
    472
    1
    Gk can't be used on a polymer frame because it has to be cooked.
     
  7. 33rdglock17

    33rdglock17
    Expand Collapse
    Boosh

    Joined:
    Feb 6, 2011
    135
    0
    Location:
    anti gun, IL
    Yes but what about the duracoat kit?
     
  8. kenndapp

    kenndapp
    Expand Collapse

    Joined:
    May 20, 2012
    317
    0
    from what i heard you can do 2 or 3 frames with the kit. the durakote kit is what i am probably going to use. no heat required. still worried about the durability. especially with alot of kydex use. and the matt finish ending up glossy.........but at the price it i don't see the down side.
     
  9. 33rdglock17

    33rdglock17
    Expand Collapse
    Boosh

    Joined:
    Feb 6, 2011
    135
    0
    Location:
    anti gun, IL
    I heard playing with the amount of reducer helps with the gloss issue. Also spraying very light coats helps as well. I'm just worried ill get halfway through and I'll run out of product
     
    #9 33rdglock17, Nov 13, 2012
    Last edited: Nov 13, 2012
  10. Henry's Dad

    Henry's Dad
    Expand Collapse
    woof, woof

    Joined:
    Jun 5, 2011
    820
    2
    Location:
    Upriver of 3 Mile Island
    I've done two guns with duracoat shake n spray kits. Very happy with the results on glock frames. My edc G23 shows ZERO wear after a year+.

    Just follow the directions on prep and degreasing, and give it time to cure.

    I used the ultra-flat tactical on my first gun, but a "regular" color on my next project. Must say I prefer the ultra-flat. Not nearly as slick and shiny.

    Forget doing 2-3 guns, as advertised. No way. Buy one kit per gun.

    First pic: G23 with ultra-flat coyote
    2nd pic: G30SF with Air Force green (not ultra-flat)

    I tried Alumahyde II several times on random objects (knife handles, etc). It certainly does the job, but I like duracoat much better.

    View attachment 228999

    View attachment 229000
     
  11. kenndapp

    kenndapp
    Expand Collapse

    Joined:
    May 20, 2012
    317
    0
    those pics are an EDC??? it looks great! and it a year old? do you train with your EDC alot? in and out of the holster much?
    i am blown away here. it looks factory.
     
  12. Henry's Dad

    Henry's Dad
    Expand Collapse
    woof, woof

    Joined:
    Jun 5, 2011
    820
    2
    Location:
    Upriver of 3 Mile Island
    The G23 has been my edc for probably 2 years. I did the duracoat about a year ago after I stippled and did some other tinkering with the frame.

    Full disclosure: I use a soft nylon holster 99% of the time, never kydex and rarely leather, so that may have an effect on longevity of the finish. It goes to the range about 1x every other month (wish I had more time, but that's life).

    Yet it still gets the usual mild handling "abuse" of being an edc gun, and it has held up beautifully. Thanks.

    edit: the G30 was sold recently and never carried much after the duracoating.
     
    #12 Henry's Dad, Nov 13, 2012
    Last edited: Nov 13, 2012
  13. RYT 2BER

    RYT 2BER
    Expand Collapse

    Joined:
    Apr 17, 2011
    2,518
    1
    Location:
    The Gunshine State
    Whyyyyy!!!????!? :crying: