close

Privacy guaranteed - Your email is not shared with anyone.

Source for "official" 10mm 200g cast loads?

Discussion in '10mm Reloading Forum' started by kpp80202, Apr 8, 2010.


  1. kpp80202

    kpp80202
    Expand Collapse

    Joined:
    Jul 19, 2002
    69
    0
    Location:
    Littleton, CO
    I bought a box of Colorado Cast 10mm 200g LFP bullets, and want to roll my own loads for a Colt Delta Elite. I have seen pet loads here and there, and have looked at several reloading manuals, but cannot find any 200g cast lead loads provided by bullet or powder manufacturers. Does anyone know where I can find them?

    Going back to pet loads, does anyone have any good 200g hard cast (non gas checked) 10mm loads in the 1100 fps range using Unique, Bullseye or 2400 (the powders I use for .38, .357, .44, and .45 Colt and have on hand)?


    Thanks.
     
  2. Taterhead

    Taterhead
    Expand Collapse
    Counting Beans

    Joined:
    Dec 13, 2008
    3,581
    95
    Location:
    Boise, Idaho
    Accurate Powders lists the following load for a cast lead TC 200 gr bullet:

    Powder: A9

    Start load: 10.6 @ 1018 fps
    Max load: 11.8 @ 1157 fps
    Primer: Winchester WLP
    COL: 1.25"

    In my copy of loadbooks, Lyman lists load data for 9 different powders. Since you mentioned Unique and Bullseye, I'll list that data here.

    Projectile: 200 gr cast lead fp (#2 alloy)
    COL 1.253"
    Primer: CCI 300
    Brass: Norma

    Unique:

    Start: 5.7 @ 1031
    Max: 6.4 @ 1154

    Bullseye:

    Start: 5.0 @ 1034
    Max: 5.6 @ 1102

    They also have data for: Red Dot, Blue Dot, 800X, 231, WSL, & A7. Let me know if any of those are of interest and I'll list them.
     

  3. kpp80202

    kpp80202
    Expand Collapse

    Joined:
    Jul 19, 2002
    69
    0
    Location:
    Littleton, CO
    Thanks! Looks like I need to get a copy of the Lyman manual--is that from their reloading manual or their cast bullet manual?
     
    #3 kpp80202, Apr 9, 2010
    Last edited: Apr 9, 2010
  4. Taterhead

    Taterhead
    Expand Collapse
    Counting Beans

    Joined:
    Dec 13, 2008
    3,581
    95
    Location:
    Boise, Idaho
    I got those from my copy of "Loadbooks USA." If you are not familiar with those, you may want to pick up a copy. It is about $7 and worth every penny. It is basically a photocopy-grade collection of most of the published load data from the component manufacturers. Some if it is from older versions of reloading manuals, but still full of very useful recipies. They'll say "One Book / One Caliber" on the cover, and this one is for the 40 S&W & 10mm auto. I also have them for rifle handloading.

    I believe that the Lyman data was from their reloading manual.
     
  5. kpp80202

    kpp80202
    Expand Collapse

    Joined:
    Jul 19, 2002
    69
    0
    Location:
    Littleton, CO
    Thanks--I just picked up a copy of the manual today.