Slide on G17 not coming off smoothly

Discussion in 'General Glocking' started by Wetboy, Oct 21, 2012.


Tags:
  1. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    Hi, quick query for the experts: on my Gen 3 G17 the slide seems to stick a little when trying to remove it.
    I "grip" it at the back to take the pressure off the spring and pull the slide back a few mm.
    With the other hand I pull down the two slide release lock thingys.
    Now the slide will move forward, but only about 10 or 15 mm then stops. To let the slide move completely off the frame I have to pull the trigger, then it'll come off.
    Is this normal?
     

    Wanna kill these ads? We can help!
  2. Aux Bear

    Aux Bear
    Expand Collapse

    Joined:
    Dec 27, 2010
    461
    0
    Location:
    SW Chicago Suburbs
    Yes. Dry fire it first, (make certain that it is unloaded) then pull the slide back slighly, pull down on the "two slide release lock thingys" and the slide should about come off under its own weight.
     

  3. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    Thanks, I do dry fire it first, and the trigger is "back", however it slides forward about 10mm and stops instead of sliding off fully. Its at this point when it stops, that I have to pull the trigger again (only a little bit, as its already back) and then the slide comes off.

    I've noticed that the recoil spring doesnt sit neatly in the semi-circular grove on the barrel. It goes in ok, but after a couple of racks, such as those to check the pistol is empty, it seems to have risen a little though hasnt popped out ever.
     
  4. David_31216

    David_31216
    Expand Collapse

    Joined:
    Oct 17, 2012
    16
    1
    Sounds like you may not be seating the recoil spring all the way in its recess to begin with. Make sure the spring is FULLY seated in the recess.
    Regards,
    David
    _________________

    Certified Glock armorer
    Member, NRA
    Member, GSSF
    Member, Georgiacarry.org
     
  5. TAKtical

    TAKtical
    Expand Collapse

    Joined:
    Sep 11, 2012
    28
    0
    That sounds really strange. I have 8 glocks and 3 of them are 17's. Ive never encountered anything like this. Something is wrong. I would try a new guide rod or send it to glock.
     
  6. DJ Niner

    DJ Niner
    Expand Collapse
    Moderator

    Joined:
    Feb 13, 2001
    14,473
    418
    Location:
    North-Central USA
    Does your Glock have the NY1 or NY2 trigger spring installed? If so, I believe this is normal behavior, as the trigger must be depressed again (or held down) to remove the slide on Glocks that have these components installed.

    If you have your Glock case with the sticker, describing the gun, it should say "5.5 lb", "8 lb", or something similar on the sticker. The 8 lb spring in known as the NY1 spring, and there is also another, heavier, spring called the NY2.
     
  7. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    Ahhh We have a winner!

    Yes. NY2 trigger installed!

    At least I know this is normal behaviour now. Thank you all very much.
     
  8. RYT 2BER

    RYT 2BER
    Expand Collapse

    Joined:
    Apr 17, 2011
    2,518
    1
    Location:
    The Gunshine State
    Do you have the mag out or in.......
     
  9. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    Always out.
    Mag out, lock slide & check empty, rack 3 times & dry fire. Then try to remove slide.
     
  10. JasonC8301

    JasonC8301
    Expand Collapse

    Joined:
    Oct 23, 2006
    187
    0
    Why NY2? If I had a choice it would be at most a NY1 with a - connector.

    But the NY2 orange spring pushes the trigger bar foward which makes the trigger heavier and offers a more positive reset while at the same time adding the possibility of needing to pull the trigger a second time to get the slide off during field stripping.

    The standard trigger spring pulls the trigger rearward which explain why there is no need for the trigger manipulation after the trigger is pulled.
     
  11. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    Apologies, it appears, after a bit of online research I actually have a NY1 trigger (olive colour) and standard connector.
     
  12. jbglock

    jbglock
    Expand Collapse

    Joined:
    Aug 18, 2012
    467
    0
    Still normal. Every Glock I've had over the years with that spring requires you to pull the trigger fully rearward after releasing the slide to get them off the frame. Nothing is wrong with your gun. Be careful of some of these so called "experts" that post here.
     
  13. Wetboy

    Wetboy
    Expand Collapse

    Joined:
    Oct 7, 2012
    13
    0
    That's reassuring. I was worried that pulling the trigger back with the slide forward was "a bad thing"
    Happy now that its to be expected. Thank you one & all!
     
  14. ron34422

    ron34422
    Expand Collapse

    Joined:
    Oct 23, 2012
    14
    0
    I'm having a similar problem with my G17 Gen2...when field stripping it is difficult pushing the slide forward until it's fully separated from the receiver...I can move the slide forward with my right hand just enough to pull the slide free with my left hand (after releasing the slide locks)...it seems to be in a "bind" for some reason...when re-assyebling it seems to bind just when the rear of the slide is about 1/3 of the way on the rear slide rail...
    (see photos)...I have no problem with the function of the pistol...any help would be appreciated..
     

    Attached Files:

    #14 ron34422, Oct 27, 2012
    Last edited: Oct 27, 2012
  15. jbglock

    jbglock
    Expand Collapse

    Joined:
    Aug 18, 2012
    467
    0
    1. Tried simply pulling the trigger back completely?
    2. Is your recoil spring assembly properly seated?
     
  16. ron34422

    ron34422
    Expand Collapse

    Joined:
    Oct 23, 2012
    14
    0
    Yes, the trigger is fully back...the spring seems to be seated properly...the slide moves easily along the rails until it reaches the point in the photos...at that point the slide seems to move slightly upward on the rear rail causing the slide and frame to contact each other near the end of the barrel...could the rear slide be misaligned or slightly bent upward?...
     
    #16 ron34422, Oct 27, 2012
    Last edited: Oct 28, 2012

Loading...
Similar Threads Forum Date
Plating on Trigger bar coming off G43 brand New Firearm Gunsmithing Dec 20, 2015
HVAC Furnace burners not coming on? The Okie Corral Dec 24, 2014
G19 slide coming off rails General Glocking Sep 12, 2013
barrel color coming off Gunsmithing Sep 18, 2012
2022 Slide not locking on last round The Sig Sauer Club Jun 8, 2010
Duty Gear at CopsPlus