close

Privacy guaranteed - Your email is not shared with anyone.

Welcome to Glock Talk

Why should YOU join our Glock forum?

  • Converse with other Glock Enthusiasts
  • Learn about the latest hunting products
  • Becoming a member is FREE and EASY

If you consider yourself a beginner or an avid shooter, the Glock Talk community is your place to discuss self defense, concealed carry, reloading, target shooting, and all things Glock.

Sig 522 parts ??

Discussion in 'Rimfire Forum' started by Jerry, Nov 10, 2011.

  1. Jerry

    Jerry Staff Member Moderator Millennium Member

    4,116
    1
    Dec 21, 1998
    Louisiana
    What are the two plastic blocks for that are in the bag with the extended stock pad? Went through the manual three times. Nothing! Looked in every nuke and cranny from every angle inside and out of the rifle. I give! What in the heck are they for? Something to do with the thickerer pad? :dunno:
     
  2. AWGD8

    AWGD8 Sr. Glocker29SF

    638
    11
    Mar 19, 2006
    Dairyland

    Same here...:dunno:
     


  3. Jerry

    Jerry Staff Member Moderator Millennium Member

    4,116
    1
    Dec 21, 1998
    Louisiana


    I’m wondering if it does something under the thicker recoil-pad. I have no idea what it could possibly do and I’m not pulling the pad just to see. A note in the bag would have been a nice touch.

    There also isn’t anything in the instruction booklet about how to remove the recoil-pad from the stock. Luckily in one of the videos posted on YouTube the guy tells how to do it (no visual) and makes mention that he had to figure it out because there are no instructions. You must remove/loosen/turn(?) the screw right in front of and at the top of the pad then slide the pad off. He said putting the thicker one on takes a bit of doing.

    This sure is a fun gun though! :supergrin:
     
    Last edited: Nov 10, 2011
  4. AWGD8

    AWGD8 Sr. Glocker29SF

    638
    11
    Mar 19, 2006
    Dairyland
    I was planning on putting some cusion or tape to prevent the butt stock from wiggling and discovered this....

    Here is the answer my friend. I discovered it by accident how to pull the stock out and find the 2 tiny holes with pegs perfectly aligned with the 2 holes on the 2 extra parts you are questioning about.

    Before I posted it, I decided to Google it and found this:

    http://www.sigpower.com/522/522.html

    So I guess I do not have to repost my accidental discovery bec. someone already did. :supergrin:

    That really saved me from posting pics and typing.:supergrin:
     
    Last edited: Nov 15, 2011